prikaz prve stranice dokumenta PRORAČUN KONSTRUKCIJE KROVNOG REŠETKASTOG NOSAČA
Access restricted to students and staff of home institution
undergraduate thesis
PRORAČUN KONSTRUKCIJE KROVNOG REŠETKASTOG NOSAČA
Split: University of Split, 2020. urn:nbn:hr:228:876839
Caktaš, Slavko
University of Split
University Department of Professional Studies

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Caktaš, S. (2020). PRORAČUN KONSTRUKCIJE KROVNOG REŠETKASTOG NOSAČA (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:876839

Caktaš, Slavko. "PRORAČUN KONSTRUKCIJE KROVNOG REŠETKASTOG NOSAČA." Undergraduate thesis, University of Split, 2020. https://urn.nsk.hr/urn:nbn:hr:228:876839

Caktaš, Slavko. "PRORAČUN KONSTRUKCIJE KROVNOG REŠETKASTOG NOSAČA." Undergraduate thesis, University of Split, 2020. https://urn.nsk.hr/urn:nbn:hr:228:876839

Caktaš, S. (2020). 'PRORAČUN KONSTRUKCIJE KROVNOG REŠETKASTOG NOSAČA', Undergraduate thesis, University of Split, accessed 03 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:876839

Caktaš S. PRORAČUN KONSTRUKCIJE KROVNOG REŠETKASTOG NOSAČA [Undergraduate thesis]. Split: University of Split; 2020 [cited 2024 December 03] Available at: https://urn.nsk.hr/urn:nbn:hr:228:876839

S. Caktaš, "PRORAČUN KONSTRUKCIJE KROVNOG REŠETKASTOG NOSAČA", Undergraduate thesis, University of Split, Split, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:228:876839

Metadata
TitlePRORAČUN KONSTRUKCIJE KROVNOG REŠETKASTOG NOSAČA
Title (english)CALCULATION OF THE ROOF TRUSS
AuthorSlavko Caktaš
MentorADO MATOKOVIĆ (mentor)
Committee memberDANIJELA PEZER (predsjednik povjerenstva)
Committee memberVLADIMIR VETMA (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
Split
Defense date and country2020-09-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodnom dijelu završnog rada opisana je primjena rešetkastih konstrukcija, te njihova podjela u različite kategorije. Nakon toga je prikazan na jednom nosaču proračun unutarnjih sila metodom čvora. U razradi završnog rada napravljen je proračun konstrukcije krovnog nosača za različite slučajeve opterećenja krova osim vlastite težine pokrova (snijeg, vjetar). Zatim je bilo potrebno izvršiti dimenzioniranje štapova i njihova kontrola na izvijanje u slučajevima da je rešetkasti nosač napravljen od različitih materijala. Uspoređen je utrošak materijala za izradu štapova u odnosu na njihovu cijenu.
Abstract (english)
The introductory part of the final work describes the use of truss structures and their division into different categories. After that, the calculation of the internal forces by a node method is shown on a one truss. In the elaboration of the final work, a calculation of the roof beam construction was made for different cases of roof load in addition to the roof's own weight (snow, wind). Then it was necessary to dimension the rods and check them in a buckling in cases where the truss was made of different materials. The cost of materials used to make the rods was compared to their cost.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:876839
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-11-17 13:19:04