prikaz prve stranice dokumenta PRORAČUN REŠETKASTOG NOSAČA
Access restricted to students and staff of home institution
undergraduate thesis
PRORAČUN REŠETKASTOG NOSAČA
Split: University of Split, 2020. urn:nbn:hr:228:752347
Tomeljak, Toni
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Tomeljak, T. (2020). PRORAČUN REŠETKASTOG NOSAČA (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:752347

Tomeljak, Toni. "PRORAČUN REŠETKASTOG NOSAČA." Undergraduate thesis, University of Split, 2020. https://urn.nsk.hr/urn:nbn:hr:228:752347

Tomeljak, Toni. "PRORAČUN REŠETKASTOG NOSAČA." Undergraduate thesis, University of Split, 2020. https://urn.nsk.hr/urn:nbn:hr:228:752347

Tomeljak, T. (2020). 'PRORAČUN REŠETKASTOG NOSAČA', Undergraduate thesis, University of Split, accessed 06 November 2024, https://urn.nsk.hr/urn:nbn:hr:228:752347

Tomeljak T. PRORAČUN REŠETKASTOG NOSAČA [Undergraduate thesis]. Split: University of Split; 2020 [cited 2024 November 06] Available at: https://urn.nsk.hr/urn:nbn:hr:228:752347

T. Tomeljak, "PRORAČUN REŠETKASTOG NOSAČA", Undergraduate thesis, University of Split, Split, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:228:752347

Metadata
TitlePRORAČUN REŠETKASTOG NOSAČA
Title (english)THE LATTICE GIRDER CALCULATION
AuthorToni Tomeljak
MentorAdo Matoković (mentor)
Committee memberDanijela Pezer (član povjerenstva)
Committee memberVladimir Vetma (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2020-09-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu je izvršen proračun rešetkastog nosača zadanog opterećenja za tri različite varijante rešetkastog nosača. U uvodnom dijelu kratko je opisan rešetkasti nosač te su prikazane dvije metode izračunavanja sila u štapovima (metoda čvorova i metoda presjeka). Nakon izvršenog proračuna rešetkastog nosača napravljeno je dimenzioniranje rešetkastog nosača za sve tri varijante kao i kontrola stabilnosti tlačno opterećenih štapova. U zadnjem dijelu rada izvršeno je oblikovanje jednog proizvoljnog čvora rešetkastog nosača za jednu od tri razmatrane varijante.
Abstract (english)
In this paper, a calculation of a lattice girder of a given load for three different variants of a lattice girder is made. The introductory part briefly describes the lattice girder and presents two methods for calculating the forces in the rods (knot method and cross-section method). After the calculation of the lattice girder, the dimensioning of the lattice girder for all three variants was made, as well as the control of the stability of the pressure-loaded rods. In the last part of the paper, an arbitrary node of the lattice girder was designed for one of the three considered variants.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:752347
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-11-26 13:17:18