prikaz prve stranice dokumenta KNX RF
Access restricted to students and staff of home institution
master's thesis
KNX RF
Split: University of Split, 2020. urn:nbn:hr:228:725050
Gjirlić, Marko
University of Split
University Department of Professional Studies
Department of Electrical Engineering

Institutional repository: Repository of University Department of Professional Studies

Cite this document

Gjirlić, M. (2020). KNX RF (Master's thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:725050

Gjirlić, Marko. "KNX RF." Master's thesis, University of Split, 2020. https://urn.nsk.hr/urn:nbn:hr:228:725050

Gjirlić, Marko. "KNX RF." Master's thesis, University of Split, 2020. https://urn.nsk.hr/urn:nbn:hr:228:725050

Gjirlić, M. (2020). 'KNX RF', Master's thesis, University of Split, accessed 04 January 2025, https://urn.nsk.hr/urn:nbn:hr:228:725050

Gjirlić M. KNX RF [Master's thesis]. Split: University of Split; 2020 [cited 2025 January 04] Available at: https://urn.nsk.hr/urn:nbn:hr:228:725050

M. Gjirlić, "KNX RF", Master's thesis, University of Split, Split, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:228:725050

Metadata
TitleKNX RF
Title (english)KNX RF
AuthorMarko Gjirlić
MentorSilvano Jenčić (mentor)
Committee memberToni Jončić (član povjerenstva)
Committee memberTonko Kovačević (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Electrical Engineering)
Split
Defense date and country2020-07-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Cllj ovog rada je napraviti sustav automatizacije upravljanja u zgradi putem uređaja KNX tehnologije. Električna shema u ovom radu sadrži KNX uređaje TP1 i RF topologije, te računalo za programiranje uređaja. Programiranje projekta obavlja se u softverskom alatu ETS u kojem će biti obuhvaćene parametrizacija i konfiguracija uređaja, te kreiranje grupnih adresa koje služe za međusobnu komunikaciju među uređajima. Također je moguće povezivanje na neku drugu KNX maketu putem uređaja RF topologije, a cijeli sustav upravljanja mora zadovoljavati sigurnosne mjere budući da se KNX sabirnica putem ispravljača napaja iz električne mreže.
Abstract (english)
The goal of this paper is to create a building automation system through KNX technology devices. The wiring diagram in this paper contains KNX TP1 and RF devices, and a device programming computer. Project programming is performed in the software tool ETS, which will include parameterization and configuration of devices, and the creation of group addresses that are used for mutual communication between devices. It is also possible to connect to another KNX model via an RF topology devices.The entire control system must meet safety measures since the KNX bus is powered from the mains via a rectifier.
Keywords
Keywords (english)
Languageenglish
URN:NBNurn:nbn:hr:228:725050
Study programmeTitle: Electrical Engineering – specialist graduate - professional
Study programme type: professional
Study level: specialist graduate
Academic / professional title: stručni/a specijalist/specijalistica inženjer/inženjerka elektrotehnike (stručni/a specijalist/specijalistica inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-11-27 13:43:00