prikaz prve stranice dokumenta Tehnologija izrade pužnog vratila motokultivatora
  Download
PDF 2.82 MB
undergraduate thesis
Tehnologija izrade pužnog vratila motokultivatora
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechical Sciences Osijek, 2019. urn:nbn:hr:151:006359
Šalov, Boris
Josip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
DEPARTMENT FOR AGRICULTURAL TECHNICS

Institutional repository: Repository of the Faculty of Agrobiotechnical Sciences Osijek

Cite this document

Šalov, B. (2019). Tehnologija izrade pužnog vratila motokultivatora (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:151:006359

Šalov, Boris. "Tehnologija izrade pužnog vratila motokultivatora." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2019. https://urn.nsk.hr/urn:nbn:hr:151:006359

Šalov, Boris. "Tehnologija izrade pužnog vratila motokultivatora." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2019. https://urn.nsk.hr/urn:nbn:hr:151:006359

Šalov, B. (2019). 'Tehnologija izrade pužnog vratila motokultivatora', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, accessed 29 November 2024, https://urn.nsk.hr/urn:nbn:hr:151:006359

Šalov B. Tehnologija izrade pužnog vratila motokultivatora [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek; 2019 [cited 2024 November 29] Available at: https://urn.nsk.hr/urn:nbn:hr:151:006359

B. Šalov, "Tehnologija izrade pužnog vratila motokultivatora", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, Osijek, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:151:006359

Metadata
TitleTehnologija izrade pužnog vratila motokultivatora
Title (english)Technology of gear shaft production for rototiller
AuthorBoris Šalov
MentorIvan Vidaković (mentor)
Committee memberGoran Heffer (predsjednik povjerenstva)
Committee memberVjekoslav Tadić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
(DEPARTMENT FOR AGRICULTURAL TECHNICS)
Osijek
Defense date and country2019-07-15, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Agronomy
Agricultural Engineering and Technology
Abstract
Primjena motokultivatora je u plastenicima, staklenicima, voćnjacima, vinogradima, vrtovima, okućnicama i u brdsko planinskim područjima. Rade na principu rotiranja motičica koje dobivaju pogon od pogonskog vratila. Prijenos pogona ili snage sa pogonskog vratila na motičice izvodi se pomoću zupčanih prijenosnika, koji se sastoje od pogonskog vratila spregnutog u zupčani par sa gonjenim zupčanikom. U slučaju opisanog motokultivatora, zupčani prijenosnik se sastoji od puža i pužnog kola, koji osiguravaju miran i tih rad uz visoki prijenosni omjer i dugi vijek trajanja. Strojna izrada pužnog vratila iziskuje veliko znanje poljoprivredne mehanizacije, proizvodnih tehnologija te postupaka strojne i toplinske obrade materijala. Za izradu opisanog pužnog vratila upotrebljavaju se konstrukcijski čelici za cementaciju, zbog svojih mehaničkih i tehnoloških svojstava. Od vrsta strojnih obrada čelika upotrebljava se piljenje, tokarenje, glodanje i vanjsko okruglo brušenje, kako uz pomoć klasičnih obradnih strojeve, tako i suvremenih CNC strojeva i tehnologije. Nakon strojne obrade pužnog vratila slijedi kemijsko-difuzijski postupak toplinske obrade cementiranje i induktivno kaljenje. Kontrola kvalitete vrši se pri svim fazama izrade i izvodi se unaprijed utvrđenim mjernim uređajima i pomagalima.
Abstract (english)
Rototillers are used in plastic greenhouses, glasshouses, orchards, vineyards, gardens, small gardens and in hilly and mountainous terrains. They operate on the principle of rotating tines which get the drive, i.e. the power from the drive shaft. The transmission of drive or power from the drive shaft to the tines is carried out by the gear drives, which consist of a gear arrangement of a drive shaft engaged with a driven gear. In the case of the described tiller, the gear drive consists of worm gear shaft and worm wheel, which ensure smooth and quiet transmission with high transmission ratio and achievable long lifetime. The machining of the worm gear shaft requires abundant knowledge of agricultural mechanization, production technologies and processes of mechanics and steel heat treatments. Material used for the production of the described worm gear shaft is case hardening steel, due to its mechanical and technological properties. The types of steel machining processes used are sawing, turning, milling and outer round grinding, with the help of classical machining systems as well as modern CNC machines and technologies. After the worm gear shaft machining, what follows is a chemical-diffusion heat treatment process of carburization and inductive hardening. Quality control is done at all stages of manufacture and it is carried out with pre-determined measuring devices and tools.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:151:006359
Study programmeTitle: Agriculture; specializations in: Agroeconomics, Plant production, Mechanization, Zootechnique, Horticulture
Course: Mechanization
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka agronomije (sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka agronomije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public notezavršni rad
Created on2019-07-23 10:02:11