prikaz prve stranice dokumenta Simulacija sjetve sijačicom PSK - OLT na ispitnom stolu
  Download
PDF 1.59 MB
master's thesis
Simulacija sjetve sijačicom PSK - OLT na ispitnom stolu
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechical Sciences Osijek, 2020. urn:nbn:hr:151:765697
Andričević, Filip
Josip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
Department of Agricultural Engineering and Renewable Energy Resources

Institutional repository: Repository of the Faculty of Agrobiotechnical Sciences Osijek

Cite this document

Andričević, F. (2020). Simulacija sjetve sijačicom PSK - OLT na ispitnom stolu (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:151:765697

Andričević, Filip. "Simulacija sjetve sijačicom PSK - OLT na ispitnom stolu." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2020. https://urn.nsk.hr/urn:nbn:hr:151:765697

Andričević, Filip. "Simulacija sjetve sijačicom PSK - OLT na ispitnom stolu." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2020. https://urn.nsk.hr/urn:nbn:hr:151:765697

Andričević, F. (2020). 'Simulacija sjetve sijačicom PSK - OLT na ispitnom stolu', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, accessed 29 June 2024, https://urn.nsk.hr/urn:nbn:hr:151:765697

Andričević F. Simulacija sjetve sijačicom PSK - OLT na ispitnom stolu [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek; 2020 [cited 2024 June 29] Available at: https://urn.nsk.hr/urn:nbn:hr:151:765697

F. Andričević, "Simulacija sjetve sijačicom PSK - OLT na ispitnom stolu", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, Osijek, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:151:765697

Metadata
TitleSimulacija sjetve sijačicom PSK - OLT na ispitnom stolu
Title (english)Simulation of sowing with PSK - OLT sowing machine on the test table
AuthorFilip Andričević
MentorĐuro Banaj (mentor)
Committee memberVjekoslav Tadić (predsjednik povjerenstva)
Committee memberDražen Horvat (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
(Department of Agricultural Engineering and Renewable Energy Resources)
Osijek
Defense date and country2020-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Agronomy
Agricultural Engineering and Technology
Abstract
Istraživanje u radu prikazuje rezultate kvalitete sjetve PSK – OLT sijačice, u kontroliranim uvjetima u praktikumu za poljoprivrednu tehniku i obnovljive izvore energije. U istraživanju je korištena sjetvena ploča n=22 (Ø=5,5 mm) s lančanikom z-24 pri 4, 6, 8, 10 i 12 km h-1, te krupno plosnata (KO) frakcija hibrida kukuruza tvrtke „Pioneer“ P 9911. Najveća preciznost je zabilježena pri brzini gibanja sijačice od 4 km h-1 i prijenosnom omjeru mjenjača 3B kod korištenja sjetvene ploče n=22 (Ø=5,5 mm). Najveći otklon je dobiven pri brzini gibanja sijačice od 6 km h-1 i položaju skidača sjemena na 22 korištenjem sjetvene ploče n=22 gdje je otklon bio 7,33 % .
Abstract (english)
The research presents the results of sowing quality of PSK - OLT seeder, in controlled conditions in a practicum for agricultural machinery and renewable energy sources. The research used a sowing plate n = 22 (Ø = 5.5 mm) with a z-24 sprocket at 4, 6, 8, 10 and 12 km h-1, and a coarse-grained (KO) fraction of „Pioneer“ maize hybrids P 9911. The highest accuracy was recorded at a seed drill speed of 4 km h-1 and a gear ratio of 3B when using a seed drill n = 22 (Ø = 5.5 mm). The largest deflection was obtained at a seed drill speed of 6 km h-1 and a seed puller position at 22 using a sowing plate n = 22 where the deflection was 7.33%.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:151:765697
Study programmeTitle: Mechanization
Study programme type: university
Study level: graduate
Academic / professional title: magistar/ magistra inženjer/inženjerka mehanizacije (magistar/ magistra inženjer/inženjerka mehanizacije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public notediplomski rad
Created on2020-10-16 11:46:52