prikaz prve stranice dokumenta Utjecaj obodne brzine sjetvene ploče na razmak zrna u sjetvi kukuruza kokičara
  Download
PDF 1.9 MB
master's thesis
Utjecaj obodne brzine sjetvene ploče na razmak zrna u sjetvi kukuruza kokičara
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2022. urn:nbn:hr:151:987847
Pavelić, Matko
Josip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
Department of Agricultural Engineering and Renewable Energy Resources

Institutional repository: Repository of the Faculty of Agrobiotechnical Sciences Osijek

Cite this document

Pavelić, M. (2022). Utjecaj obodne brzine sjetvene ploče na razmak zrna u sjetvi kukuruza kokičara (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:151:987847

Pavelić, Matko. "Utjecaj obodne brzine sjetvene ploče na razmak zrna u sjetvi kukuruza kokičara." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:151:987847

Pavelić, Matko. "Utjecaj obodne brzine sjetvene ploče na razmak zrna u sjetvi kukuruza kokičara." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:151:987847

Pavelić, M. (2022). 'Utjecaj obodne brzine sjetvene ploče na razmak zrna u sjetvi kukuruza kokičara', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:151:987847

Pavelić M. Utjecaj obodne brzine sjetvene ploče na razmak zrna u sjetvi kukuruza kokičara [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek; 2022 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:151:987847

M. Pavelić, "Utjecaj obodne brzine sjetvene ploče na razmak zrna u sjetvi kukuruza kokičara", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, Osijek, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:151:987847

Metadata
TitleUtjecaj obodne brzine sjetvene ploče na razmak zrna u sjetvi kukuruza kokičara
Title (english)Influence of peripheral speed on grain spacing in popcorn maize sowing
AuthorMatko Pavelić
MentorAnamarija Banaj (mentor)
Committee memberĐuro Banaj (predsjednik povjerenstva)
Committee memberBojan Stipešević (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
(Department of Agricultural Engineering and Renewable Energy Resources)
Osijek
Defense date and country2022-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Agronomy
Agricultural Engineering and Technology
Abstract
U radu su prikazani rezultati mjerenja korištenjem ploča sa 12 i 24 otvora sa položajem skidača “6” i “7”. Istraživanje je provedeno u Centralnom praktikumu Zavod za poljoprivrednu tehniku i obnovljive izvore energije. Za istraživanje korištena je sijačica MaterMacc TwinRow-2. TwinRow sijačica za glavni cilj ima bolje iskorištenje tla i ostalih resura te povećanje prinosa i kvalitete kukuruza. Radi na takozvanom “cik-cak” principu koji omogućava povećanje gustoće same sjetve. U radu su prikazani rezultati istraživanja rada MaterMacc TwinRow2 sijačice pri simulaciji sjetve korištenjem sjetvenih ploča sa n=12, n= 24 otvora po obodu, pri radnoj brzini od 6 km/h sa dva različita skidača 6 i 7.
Abstract (english)
The paper presents the results of measurements using plates with 12 and 24 holes with the position of the stripper "6" and "7". The research was conducted in the Central Practicum of the Institute for Agricultural Technology and Renewable Energy Sources. The MaterMacc TwinRow-2 seeder was used for the research. The main goal of the TwinRow seed drill is to better use the soil and other resources and increase the yield and quality of corn. It works on the so-called "zig-zag" principle, which makes it possible to increase the density of the sowing itself. The paper presents the results of research into the work of the MaterMacc TwinRow2 seed drill during sowing simulation using seed plates with n=12, n= 24 openings per circumference, at a working speed of 6 km/h with two different removers 6 and 7.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:151:987847
Study programmeTitle: Mechanization
Study programme type: university
Study level: graduate
Academic / professional title: magistar/ magistra inženjer/inženjerka mehanizacije (magistar/ magistra inženjer/inženjerka mehanizacije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public notediplomski rad
Created on2022-10-27 13:24:22