prikaz prve stranice dokumenta Primjena tehnologije blanjanja pri izradi zupčanika u poljoprivrednoj tehnici
  Download
PDF 1.24 MB
undergraduate thesis
Primjena tehnologije blanjanja pri izradi zupčanika u poljoprivrednoj tehnici
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2023. urn:nbn:hr:151:377366
Lakušić, Petar
Josip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
Department of Agricultural Engineering and Renewable Energy Resources

Institutional repository: Repository of the Faculty of Agrobiotechnical Sciences Osijek

Cite this document

Lakušić, P. (2023). Primjena tehnologije blanjanja pri izradi zupčanika u poljoprivrednoj tehnici (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:151:377366

Lakušić, Petar. "Primjena tehnologije blanjanja pri izradi zupčanika u poljoprivrednoj tehnici." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2023. https://urn.nsk.hr/urn:nbn:hr:151:377366

Lakušić, Petar. "Primjena tehnologije blanjanja pri izradi zupčanika u poljoprivrednoj tehnici." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2023. https://urn.nsk.hr/urn:nbn:hr:151:377366

Lakušić, P. (2023). 'Primjena tehnologije blanjanja pri izradi zupčanika u poljoprivrednoj tehnici', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, accessed 17 July 2024, https://urn.nsk.hr/urn:nbn:hr:151:377366

Lakušić P. Primjena tehnologije blanjanja pri izradi zupčanika u poljoprivrednoj tehnici [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek; 2023 [cited 2024 July 17] Available at: https://urn.nsk.hr/urn:nbn:hr:151:377366

P. Lakušić, "Primjena tehnologije blanjanja pri izradi zupčanika u poljoprivrednoj tehnici", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, Osijek, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:151:377366

Metadata
TitlePrimjena tehnologije blanjanja pri izradi zupčanika u poljoprivrednoj tehnici
Title (english)Application of planing technology in the manufacture of gears in agricultural technique
AuthorPetar Lakušić
MentorIvan Vidaković (mentor)
Committee memberGoran Heffer (član povjerenstva)
Committee memberGoran Pačarek (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
(Department of Agricultural Engineering and Renewable Energy Resources)
Osijek
Defense date and country2023-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Agronomy
Agricultural Engineering and Technology
Abstract
Ovaj završni rad obrađuje temu izrađivanja zupčanika metodom blanjanja. Na početku rada se obrađuje pojam zupčanika te se opisuju vrste zupčanika i naprezanja tijekom njihovog rada. Sljedeće poglavlje opisuje metode i materijale u izradi zupčanika te daje kratak osvrt na primjenu zupčanika u poljoprivrednoj tehnici. Glavni zadatak ovog rada jest definiranje metode blanjanja pri izradi zupčanika. Alati koji se koriste u ovoj metodi nazivaju se blanjalice i dijele se na kratkohodne i dugohodne blanjalice. Nakon objašnjenja osnovnog principa rada blanjalica, rad obrađuje izradu cilindričnih, stožastih zupčanika, postupak cnc izrade zupčanika i obradu zupčanika nakon same izrade. Završna obrada zupčanika te metode završne obrade predstavljene su u naslovu broj 6. Na kraju rada razmatraju se prednosti i nedostatci zupčanih prijenosa odnosno zupčanika te se daje kratak presjek svega onog o čemu se u radu govorilo.
Abstract (english)
This final work presents the topic of making gears using the planing method. At the beginning of the paper, the concept of gears is discussed, and the types of gears and stresses during their operation are described. The next chapter describes methods and materials in the manufacture of gears and gives a brief overview of the application of gears in agricultural technology. The main task of this paper is to define the method of planing when manufacturing gears. The tools used in this method are called planers and are divided into short-stroke and long-stroke planers. After explaining the basic principle of operation of planers, the work deals with the production of cylindrical and bevel gears, cnc production of gears and processing of gears after production. Gear finishing and finishing methodes are presented in heading number 6. At the end of the paper, the advantages and disadvantages of gear transmissions or gears are considered, and a brief overview of everything discussed in the paper is given.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:151:377366
Study programmeTitle: Agriculture; specializations in: Agroeconomics, Plant production, Mechanization, Zootechnique, Horticulture
Course: Mechanization
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka agronomije (sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka agronomije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public noteZavršni rad
Created on2023-10-04 10:58:13