prikaz prve stranice dokumenta UTJECAJ BRZINE RADA SIJAČICE NA KVALITETU SJETVE
  Download
PDF 2.57 MB
master's thesis
UTJECAJ BRZINE RADA SIJAČICE NA KVALITETU SJETVE
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2024. urn:nbn:hr:151:270773
Mikić, Ivan
Josip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
Department of Agricultural Engineering and Renewable Energy Resources

Institutional repository: Repository of the Faculty of Agrobiotechnical Sciences Osijek

Cite this document

Mikić, I. (2024). UTJECAJ BRZINE RADA SIJAČICE NA KVALITETU SJETVE (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:151:270773

Mikić, Ivan. "UTJECAJ BRZINE RADA SIJAČICE NA KVALITETU SJETVE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2024. https://urn.nsk.hr/urn:nbn:hr:151:270773

Mikić, Ivan. "UTJECAJ BRZINE RADA SIJAČICE NA KVALITETU SJETVE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2024. https://urn.nsk.hr/urn:nbn:hr:151:270773

Mikić, I. (2024). 'UTJECAJ BRZINE RADA SIJAČICE NA KVALITETU SJETVE', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:151:270773

Mikić I. UTJECAJ BRZINE RADA SIJAČICE NA KVALITETU SJETVE [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek; 2024 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:151:270773

I. Mikić, "UTJECAJ BRZINE RADA SIJAČICE NA KVALITETU SJETVE", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, Osijek, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:151:270773

Metadata
TitleUTJECAJ BRZINE RADA SIJAČICE NA KVALITETU SJETVE
Title (english)THE IMPACT OF THE SOWING MACHINE WORKING SPEED ON THE SOWING QUALITY
AuthorIvan Mikić
MentorĐuro Banaj (mentor)
Committee memberVjekoslav Tadić (predsjednik povjerenstva)
Committee memberAnamarija Banaj (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
(Department of Agricultural Engineering and Renewable Energy Resources)
Osijek
Defense date and country2024-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Agronomy
Agricultural Engineering and Technology
Abstract
U radu je provedeno ispitivanje utjecaja brzine rada sijačice na kvalitetu sjetve. Ispitivanje je obavljano pri brzinama od 4, 8 i 12 km h-1 te upotrebom sijačice OLT PSK4 i primjenom hibrida kukuruza Pioneer P0023. Za istraživanje se koristila sjetvena ploča n=22 te kombinacija lančanika „3C“ i „5A“. Istraživanje je pokazalo najbolji rezultat pri brzini rada od 4 km h-1 i upotrebom kombinacije lančanika „5A“, kada je prosječni razmak zrna kukuruza u redu bio jednak teorijskom razmaku. Najlošiji rezultat se pokazao pri brzini rada od 12 km h-1 te upotrebom kombinacije lančanika „5A“, kada je odstupanje prosječnog razmaka zrna kukuruza u redu bilo +2,0 % u odnosu na teorijski razmak.
Abstract (english)
This study examined the influence of the sowing machine's speed on the sowing quality. The test was performed at speeds of 4, 8 and 12 km h-1, using the OLT PSK4 sowing machine and the Pioneer P0023 maize hybrid. The seeding plate n=22 and sprocket combinations „3C“ and „5A“ were used for the research. The research showed the best result at a working speed of 4 km h-1 and using a „5A“ sprocket combination, when the average distance between maize grains in a row was equal to the theoretical distance. The worst result was shown at a working speed of 12 km h-1 and using a „5A“ sprocket combination, when the deviation of the average distance between maize grains in a row was +2.0 % compared to the theoretical distance.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:151:270773
Study programmeTitle: Mechanization
Study programme type: university
Study level: graduate
Academic / professional title: magistar/ magistra inženjer/inženjerka mehanizacije (magistar/ magistra inženjer/inženjerka mehanizacije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public notediplomski rad
Created on2024-11-28 14:47:38