prikaz prve stranice dokumenta OBLIKOVANJE SPREMNIKA POD TLAKOM ZA BIOPLIN
  Download
PDF 694.34 KB
undergraduate thesis
OBLIKOVANJE SPREMNIKA POD TLAKOM ZA BIOPLIN
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of agriculture, 2014. urn:nbn:hr:151:255759
Marijanović, Kruno
Josip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
DEPARTMENT FOR MECHANIZATION IN AGRICULTURE

Institutional repository: Repository of the Faculty of Agrobiotechnical Sciences Osijek

Cite this document

Marijanović, K. (2014). OBLIKOVANJE SPREMNIKA POD TLAKOM ZA BIOPLIN (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:151:255759

Marijanović, Kruno. "OBLIKOVANJE SPREMNIKA POD TLAKOM ZA BIOPLIN." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2014. https://urn.nsk.hr/urn:nbn:hr:151:255759

Marijanović, Kruno. "OBLIKOVANJE SPREMNIKA POD TLAKOM ZA BIOPLIN." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2014. https://urn.nsk.hr/urn:nbn:hr:151:255759

Marijanović, K. (2014). 'OBLIKOVANJE SPREMNIKA POD TLAKOM ZA BIOPLIN', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, accessed 18 December 2024, https://urn.nsk.hr/urn:nbn:hr:151:255759

Marijanović K. OBLIKOVANJE SPREMNIKA POD TLAKOM ZA BIOPLIN [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek; 2014 [cited 2024 December 18] Available at: https://urn.nsk.hr/urn:nbn:hr:151:255759

K. Marijanović, "OBLIKOVANJE SPREMNIKA POD TLAKOM ZA BIOPLIN", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, Osijek, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:151:255759

Metadata
TitleOBLIKOVANJE SPREMNIKA POD TLAKOM ZA BIOPLIN
Title (english)FORMING OF PRESSURE VESSEL FOR BIOGAS
AuthorKruno Marijanović
MentorPavo Baličević (mentor)
Committee memberDrago Kraljević
Committee memberPetar Lukač
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
(DEPARTMENT FOR MECHANIZATION IN AGRICULTURE)
Osijek
Defense date and country2014-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Agronomy
Agricultural Engineering and Technology
Abstract
Spremnici za bioplin predstavljaju jedne od najvažnijih dijelova bioplinskog postrojenja. Pri konstruiranju bioplinskog prostrojenja, koristimo visokotlačne ili niskotlačne spremnike za bioplin. Spremnici se najčešće izrađuju od čelika, od kojeg se zahtjeva izrazito visoka kvaliteta izrade te otpornost na visoke temperature i tlakove. Pri oblikovanju materijala vrlo je važno poznavati njegova svojstva , u našem slučaju čelika, te njegovo ponašanje u različitim uvjetima. Zbog toga , radimo ispitivanja od kojih su najvažnija ispitivanja čvrstoće,tvrdoće, lomljivosti, dozvoljenog naprezanja te tlačnog i vlačnog naprezanja. Također, za pravilno oblikovanje spremnika, moramo poznavati vrste i načine zavarivanja. Dobiveni rezultati ispitivanja daju nam uvid u kvalitetu i svojstva, te uz pomoć njih možemo odabrati najbolje materijale za izradu spremnika.
Abstract (english)
Tanks for biogas represent one of the most important parts of the biogas plant. In constructing biogas plant, we use high-pressure or low-pressure tanks for biogas. These tanks are usually made of steel, which requires an extremely high level of quality and resistance to high temperatures and pressures. In the design of materials, it’s very important to know its characteristics, in our case, steel, and its behavior under different conditions. Because of that fact, we must do tests. The most important are tests of strength, hardness, brittleness, allowable stress and pressure and tensile stress. Also, for the proper design of the tank, we need to know the types and methods of welding. The obtained test results give us insight into the quality and characteristics, and with their help we can select the best materials for making tanks.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:151:255759
Study programmeTitle: Agriculture; specializations in: Agroeconomics,Plant production, Mechanization, Zootechnique, Horticulture
Course: Mechanization
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka agronomije (sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka agronomije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public notezavršni rad
Created on2016-03-03 10:43:04