prikaz prve stranice dokumenta Vertikalna raspodjela zračne struje raspršivača Agromehanika 200 EN
  Download
PDF 1.08 MB
master's thesis
Vertikalna raspodjela zračne struje raspršivača Agromehanika 200 EN
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of agriculture, 2016. urn:nbn:hr:151:846361
Barišin, Marko
Josip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
DEPARTMENT FOR MECHANIZATION IN AGRICULTURE

Institutional repository: Repository of the Faculty of Agrobiotechnical Sciences Osijek

Cite this document

Barišin, M. (2016). Vertikalna raspodjela zračne struje raspršivača Agromehanika 200 EN (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:151:846361

Barišin, Marko. "Vertikalna raspodjela zračne struje raspršivača Agromehanika 200 EN." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2016. https://urn.nsk.hr/urn:nbn:hr:151:846361

Barišin, Marko. "Vertikalna raspodjela zračne struje raspršivača Agromehanika 200 EN." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, 2016. https://urn.nsk.hr/urn:nbn:hr:151:846361

Barišin, M. (2016). 'Vertikalna raspodjela zračne struje raspršivača Agromehanika 200 EN', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:151:846361

Barišin M. Vertikalna raspodjela zračne struje raspršivača Agromehanika 200 EN [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek; 2016 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:151:846361

M. Barišin, "Vertikalna raspodjela zračne struje raspršivača Agromehanika 200 EN", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Agrobiotechnical Sciences Osijek, Osijek, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:151:846361

Metadata
TitleVertikalna raspodjela zračne struje raspršivača Agromehanika 200 EN
Title (english)Vertical distribution of air flow with Agromehanika 200 EN Mistblower
AuthorMarko Barišin
MentorĐuro Banaj (mentor)
Committee memberVjekoslav Tadić (predsjednik povjerenstva)
Committee memberDražen Horvat (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
(DEPARTMENT FOR MECHANIZATION IN AGRICULTURE)
Osijek
Defense date and country2016-12-07, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Agronomy
Agricultural Engineering and Technology
Abstract
Za uspješnu zaštitu bilja značajni su preciznost i ujednačenost raspršivanja, budući da se zadovoljavajuća pokrivenost lisne površine može postići samo uz odgovarajuću kvalitetnu dezintegraciju tekućine. Na kvalitetu dezintegracije može se utjecati optimiziranjem odnosa brzine zraka, pravca gibanja i volumena biljaka. Za depoziciju sitnih kapljica naročito je neophodna veća brzina zračnog strujanja. Za depoziciju malih kapljica na listove dovoljna je minimalna brzina od 2 do 3 m/s, dok se najpovoljnija depozicija postiže kod brzine zraka između 12 i 15 m/s. Kod raspršivača Agromehanika 200N, pri brzini okretaja vratila 360 o/min, najoptimalnija depozicija, u odnosu na brzinu zračne struje, može se postići pri postavljanju lopatica ventilatora na položaj 4 i položaj 5.
Abstract (english)
The precision and uniformity of scattering of the dispersal are significant for the plant protection, since the satisfactory coverage of the leaf surface can be achieved only with the adequate quality of the fluid disintegration. The quality of the fluid disintegration can be affected by the optimization of the relation between the air speed, movement direction on plant volume. For the deposition of small drops the higher speed of air flow is especially necessary. For theirs deposition on leaves the minimum speed of 2-3 m/s is sufficient, but the best deposition is to be achieved at the air speed of 12 - 15 m/s. With the regard to the mistblower Agromehanika 200 EN, with the shaft rotation of 360 RPM, the most optimal speed of the air flow can be achieved by setting the position of the fan blades on position 4 and position 5.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:151:846361
Study programmeTitle: Mechanization
Study programme type: university
Study level: graduate
Academic / professional title: magistar/ magistra inženjer/inženjerka mehanizacije (magistar/ magistra inženjer/inženjerka mehanizacije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public notediplomski rad
Created on2016-12-16 14:00:20