prikaz prve stranice dokumenta 3D aditivne tehnologije proizvodnje pričuvnih dijelova na brodovima
No public access
master's thesis
3D aditivne tehnologije proizvodnje pričuvnih dijelova na brodovima
Split: University of Split, Faculty of Maritime Studies, 2020. urn:nbn:hr:164:617680
Goltnik, Marin
University of Split
Faculty of Maritime Studies
Department of nautical studies

Institutional repository: Repository - Faculty of Maritime Studies - Split

Cite this document

Goltnik, M. (2020). 3D aditivne tehnologije proizvodnje pričuvnih dijelova na brodovima (Master's thesis). Split: University of Split, Faculty of Maritime Studies. Retrieved from https://urn.nsk.hr/urn:nbn:hr:164:617680

Goltnik, Marin. "3D aditivne tehnologije proizvodnje pričuvnih dijelova na brodovima." Master's thesis, University of Split, Faculty of Maritime Studies, 2020. https://urn.nsk.hr/urn:nbn:hr:164:617680

Goltnik, Marin. "3D aditivne tehnologije proizvodnje pričuvnih dijelova na brodovima." Master's thesis, University of Split, Faculty of Maritime Studies, 2020. https://urn.nsk.hr/urn:nbn:hr:164:617680

Goltnik, M. (2020). '3D aditivne tehnologije proizvodnje pričuvnih dijelova na brodovima', Master's thesis, University of Split, Faculty of Maritime Studies, accessed 28 March 2025, https://urn.nsk.hr/urn:nbn:hr:164:617680

Goltnik M. 3D aditivne tehnologije proizvodnje pričuvnih dijelova na brodovima [Master's thesis]. Split: University of Split, Faculty of Maritime Studies; 2020 [cited 2025 March 28] Available at: https://urn.nsk.hr/urn:nbn:hr:164:617680

M. Goltnik, "3D aditivne tehnologije proizvodnje pričuvnih dijelova na brodovima", Master's thesis, University of Split, Faculty of Maritime Studies, Split, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:164:617680

Metadata
Title3D aditivne tehnologije proizvodnje pričuvnih dijelova na brodovima
AuthorMarin Goltnik
MentorIgor Vujović (mentor)
Committee memberHrvoje Dodig (predsjednik povjerenstva)
Committee memberPetar Matić (član povjerenstva)
Committee memberMarko Zubčić (član povjerenstva)
GranterUniversity of Split
Faculty of Maritime Studies
(Department of nautical studies)
Split
Defense date and country2020-09-29, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Traffic and Transport Technology
Abstract
U ovom radu, korištenjem tehnologije 3D ispisa, izrađeni su uzorci različitih parametara od PLA i ABS plastike te je ispitana njihova električna permitivnost. Cilj je dokazati da navedeni materijali imaju svojstva izolatora koji bi se mogli koristiti kao rezervni dijelovi u brodskom energetskom sustavu. Korištena je metoda paralelnih ploča za mjerenje kapaciteta uzoraka te je izračunata vrijednost električne permitivnosti te je grafički prikazana u ovisnosti o gustoći ispune uzoraka i rezutati... More su uspoređeni s drugim znanstvenim radovima. 3D ispis rezervnih dijelova na brodu bi znatno pojeftinio i pojednostavnio proces zamjene određenih elemenata brodskog energetskog sustava ukoliko je dostupan materijal čija dielektrična svojstva odgovaraju zahtjevu brodske energetske mreže. Less
Abstract (english)
This paper describes the permittivity properties of PLA and ABS printed samples, which have been printed with 3D printing technology. The goal is to prove that the listed materials have the properties of insulating materials that can be used in printing spare parts for the vessel's electrical system. The parallel plate method has been used for measuring the capacity of the printed samples and permittivity is graphically shown depending on the percentage of infill used in the samples thus the... More results were compared with other scientific work. 3D printing of spare parts onboard vessels would sufficiently make the process of replacing certain elements of the vessel's electrical system more affordable and much simpler if there is a material, which possess appropriate dielectric properties onboard. Less
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:164:617680
Study programmeTitle: Nautical Studies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka nautike (magistar/magistra inženjer/inženjerka nautike)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2021-01-07 09:17:25
accessibility

closeAccessibilityrefresh

If you wish to permanently save changes, click on Save, if not - your settings will be reset when you restart the browser.