prikaz prve stranice dokumenta Implementacija tehnologije 3D tiska u izradi modela dijelova motora
No public access
master's thesis
Implementacija tehnologije 3D tiska u izradi modela dijelova motora
Split: University of Split, Faculty of Maritime Studies, 2018. urn:nbn:hr:164:574875
Maleš, Neven
University of Split
Faculty of Maritime Studies
Department of nautical studies

Institutional repository: Repository - Faculty of Maritime Studies - Split

Cite this document

Maleš, N. (2018). Implementacija tehnologije 3D tiska u izradi modela dijelova motora (Master's thesis). Split: University of Split, Faculty of Maritime Studies. Retrieved from https://urn.nsk.hr/urn:nbn:hr:164:574875

Maleš, Neven. "Implementacija tehnologije 3D tiska u izradi modela dijelova motora." Master's thesis, University of Split, Faculty of Maritime Studies, 2018. https://urn.nsk.hr/urn:nbn:hr:164:574875

Maleš, Neven. "Implementacija tehnologije 3D tiska u izradi modela dijelova motora." Master's thesis, University of Split, Faculty of Maritime Studies, 2018. https://urn.nsk.hr/urn:nbn:hr:164:574875

Maleš, N. (2018). 'Implementacija tehnologije 3D tiska u izradi modela dijelova motora', Master's thesis, University of Split, Faculty of Maritime Studies, accessed 26 November 2024, https://urn.nsk.hr/urn:nbn:hr:164:574875

Maleš N. Implementacija tehnologije 3D tiska u izradi modela dijelova motora [Master's thesis]. Split: University of Split, Faculty of Maritime Studies; 2018 [cited 2024 November 26] Available at: https://urn.nsk.hr/urn:nbn:hr:164:574875

N. Maleš, "Implementacija tehnologije 3D tiska u izradi modela dijelova motora", Master's thesis, University of Split, Faculty of Maritime Studies, Split, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:164:574875

Metadata
TitleImplementacija tehnologije 3D tiska u izradi modela dijelova motora
Title (english)Implementation of 3D print technology in the production of engine part models
AuthorNeven Maleš
MentorIgor Vujović (mentor)
Committee memberJoško Šoda (predsjednik povjerenstva)
Committee memberIvica Kuzmanić (član povjerenstva)
GranterUniversity of Split
Faculty of Maritime Studies
(Department of nautical studies)
Split
Defense date and country2018-01-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Traffic and Transport Technology
Abstract
Cilj ovog rada je odabir i sastavljanje određenog trodimenzionalnog pisača te odabir, crtanje, modeliranje i ispis određenog mehaničkog sklopa čime bi se prezentirale mogućnosti pisača i sakupilo što više informacija i iskustva o 3D tehnologijama. Kao model je korišten sklop klipa i klipnjače motora 6DGRA18/22 čiji je nacrt pretvoren u 3D model u CAD programu (Inventor). Opisane su sve potrebne radnje koje je potrebno provesti za pripremu tiska 3D modela. Opisani su rezultati tiskanja, nastale greške, iskustveni zaključci i kvarovi koji se se događali u procesu tiskanja. Dat je prijedlog modernizacije 3D pisača i komentar autora rada u poglavlju Zaključak. Priložena je Uputa za korištenje pisača i otklanjanje kvarova nastala na temelju dosadašnjeg iskustva i tehničkih dokumenata dostupnih na Internetu.
Abstract (english)
The aim of this paper is to select and assemble a specific 3D printer and select, draw, model and print a specific mechanical assembly to present printer options and gather as much information and experience about 3D technology. The model used for is the 6DGRA18/22 piston and piston rod was converted into 3D CAD model (Inventor). All the necessary actions that need to be carried out for the preparation of a 3D model are described. The results of printing, errors, experimental conclusions and breakdowns that have occurred in the printing process are described. 3D printer modernization suggestion and the author's commentary are given in the chapter Conclusion. The instructions for using the printer and troubleshooting are based on the experience and technical documents available on the Internet.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:164:574875
Study programmeTitle: Marine Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka brodostrojarstva (magistar/magistra inženjer/inženjerka brodostrojarstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2018-06-04 09:36:05