prikaz prve stranice dokumenta Ispitivanje utjecaja parametara ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova
  Download
PDF 2.4 MB
undergraduate thesis
Ispitivanje utjecaja parametara ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova
Pula: Istrian University of applied sciences, 2022. urn:nbn:hr:212:569486
Savić, Igor
Istrian University of applied sciences

Institutional repository: Digital repository of Istrian University of applied sciences

Cite this document

Savić, I. (2022). Ispitivanje utjecaja parametara ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova (Undergraduate thesis). Pula: Istrian University of applied sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:212:569486

Savić, Igor. "Ispitivanje utjecaja parametara ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova." Undergraduate thesis, Istrian University of applied sciences, 2022. https://urn.nsk.hr/urn:nbn:hr:212:569486

Savić, Igor. "Ispitivanje utjecaja parametara ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova." Undergraduate thesis, Istrian University of applied sciences, 2022. https://urn.nsk.hr/urn:nbn:hr:212:569486

Savić, I. (2022). 'Ispitivanje utjecaja parametara ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova', Undergraduate thesis, Istrian University of applied sciences, accessed 10 May 2024, https://urn.nsk.hr/urn:nbn:hr:212:569486

Savić I. Ispitivanje utjecaja parametara ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova [Undergraduate thesis]. Pula: Istrian University of applied sciences; 2022 [cited 2024 May 10] Available at: https://urn.nsk.hr/urn:nbn:hr:212:569486

I. Savić, "Ispitivanje utjecaja parametara ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova", Undergraduate thesis, Istrian University of applied sciences, Pula, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:212:569486

Metadata
TitleIspitivanje utjecaja parametara ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova
Title (english)Investigation of TIG parameters influence on the mechanical properties of aluminium sheets
AuthorIgor Savić
MentorVedrana Špada (mentor)
Committee memberNeven Munjas (predsjednik povjerenstva)
Committee memberVedrana Špada (član povjerenstva)
Committee memberDavor Stanić (član povjerenstva)
GranterIstrian University of applied sciences
Pula
Defense date and country2022-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovome radu opisano je ispitivanje utjecaja ravnanja limova TIG postupkom na mehanička svojstva aluminijevih limova legure 5083 H321. Svrha rada je bila optimizacija postupka ravnanja eksperimentalnim određivanjem i usporedbom mehaničkih svojstava referentnog materijala i materijala nakon različitih uvjeta grijanja TIG postupkom. Provedbom vlačnog testa i ispitivanja savijanjem potvrđeno je kako limovi koji su dva puta grijani, ohlađeni vodom, kao i oni koji na svojoj površini imaju aluminijev oksid, nemaju značajnija smanjenja mehaničkih svojstava. Prema rezultatima rada mogu se propisati postupci ravnanja i uvesti u proizvodnju uz zahtjev za odobrenje postupka od strane certifikacijskog tijela koje za atestaciju postupka, postupak mora potvrditi uvidom u eksperimentalne mjeriteljske podatke.
Abstract (english)
The topic of this paper is investigation of TIG parameters influence on mechanical properties of aluminum sheets in aluminum alloy 5083 H321. The scope is the investigation of the influence of TIG sheet metal straightening on the mechanical properties of 5083 H321 aluminum alloy sheets. The purpose of this paper was to optimize the straightening procedure by experimentally determining and comparing the mechanical properties of the reference material and the material after different TIG parameters. The tensile test and bending test confirmed that sheets that are heated twice, cooled by water, as well as those that have oxide film on their surface, do not have significant reductions in mechanical properties. According to the results of the work, straightening procedures can be prescribed and put into production with a request for approval of the procedure by the certification body, which must certify the procedure by inspecting the experimental metrological data.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:212:569486
Study programmeTitle: Undergraduate professional study program in Mechatronics.
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka mehatronike (stručni prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka mehatronike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-07-15 09:28:26