prikaz prve stranice dokumenta Izrada uravnoteženih geoloških profila pomoću računalne aplikacije "Move"
Access restricted to students and staff of home institution
master's thesis
Izrada uravnoteženih geoloških profila pomoću računalne aplikacije "Move"
diplomski rad
Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2014. urn:nbn:hr:169:613107
Zvonar, Petar
University of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
Department of Geology and Geological Engineering

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

Zvonar, P. (2014). Izrada uravnoteženih geoloških profila pomoću računalne aplikacije "Move" : diplomski rad (Master's thesis). Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:169:613107

Zvonar, Petar. "Izrada uravnoteženih geoloških profila pomoću računalne aplikacije "Move" : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2014. https://urn.nsk.hr/urn:nbn:hr:169:613107

Zvonar, Petar. "Izrada uravnoteženih geoloških profila pomoću računalne aplikacije "Move" : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2014. https://urn.nsk.hr/urn:nbn:hr:169:613107

Zvonar, P. (2014). 'Izrada uravnoteženih geoloških profila pomoću računalne aplikacije "Move" : diplomski rad', Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, accessed 10 May 2024, https://urn.nsk.hr/urn:nbn:hr:169:613107

Zvonar P. Izrada uravnoteženih geoloških profila pomoću računalne aplikacije "Move" : diplomski rad [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering; 2014 [cited 2024 May 10] Available at: https://urn.nsk.hr/urn:nbn:hr:169:613107

P. Zvonar, "Izrada uravnoteženih geoloških profila pomoću računalne aplikacije "Move" : diplomski rad", Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Zagreb, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:169:613107

Metadata
TitleIzrada uravnoteženih geoloških profila pomoću računalne aplikacije "Move" : diplomski rad
Title (english)Construction of balanced cross-sections in "Move" software : master's thesis
AuthorPetar Zvonar
MentorDario Perković (mentor)
Committee memberDario Perković
Committee memberBruno Tomljenović
Committee memberIgor Vlahović
GranterUniversity of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
(Department of Geology and Geological Engineering)
Zagreb
Defense date and country2014-02-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mining, Petroleum and Geology Engineering
Geological Engineering
Abstract
U ovom diplomskom radu prikazan je postupak kojim se pomoću računalne aplikacije Move može provjeriti je li neki geološki profil izrađen na način i po pravilima koja vrijede pri konstrukciji tzv. uravnoteženih geoloških profila. U prvom dijelu rada je prikazana geološka građa terena i geološki profili koji su korišteni i testirani, nakon čega su opisane teoretske osnove i pravila pri izradi uravnoteženih geoloških profila te korištene računalne aplikacije. Aplikacije korištene u ovom diplomskom radu su Esri ArcGIS 9.3.1 i Midland Valley Move 13.1. U prvoj fazi izrade rada georeferencirani su listovi Osnovnih geoloških karata i trase izabranih geoloških profila pomoću aplikacije ArcGIS radi unosa odgovarajućih podataka u aplikaciju Move. U sljedećoj fazi digitalizirani su geološki profili u računalnoj aplikaciji Move. Posljednja faza izrade ovog diplomskog rada predstavljala je izradu uravnoteženih geoloških profila u računalnoj aplikaciji Move korištenjem algoritama move on fault i unfolding. Ovako dobiveni profili, izravnavanjem bora i anuliranjem pomaka na rasjedima, omogućavaju uvid u građu terena prije deformacije, čime se omogućava i provjera valjanosti interpretacije tektonskog razvitka i recentne strukturne građe istraživanog područja.
Abstract (english)
Abstract: This thesis was focused on production of balanced cross-sections with Move aplication. First part describes geological structures of cross sections locationa, followed by theory of ballanced cross section construction and used softwares in this thesis. Softwares used for this thesis are Esri ArcGIS 9.3.1 and Midland Valley Move 13.1. In the first phase the appropriate cross sections which meet all the requirements for restoration were chosen. Chosen Basic Geological Maps in 1:100,000 scale were georeferenced using ArcGIS, in order to be imported into the Move application. In the next phase it was necessary to georeference and digitize the resulting geological profiles in computer application Move. The last step was creation of balanced geological profiles in the Move software using algorithms move on fault and unfolding. The resulting profiles, annulating folds and movement on faults, provide insight into the original structure, and enable evaluation of validity of tectonic evolution and recent structural setting of the study area.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:169:613107
Study programmeTitle: Geological Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka geološkog inženjerstva (magistar/magistra inženjer/inženjerka geološkog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2015-12-21 10:25:03