prikaz prve stranice dokumenta Potential of the hydraulic concentric tubular pumping system
  Download
PDF 2.23 MB
master's thesis
Potential of the hydraulic concentric tubular pumping system
master's thesis
Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2020. urn:nbn:hr:169:076955
Curiš, Sven
University of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
Department of Petroleum and Gas Engineering and energy

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

Curiš, S. (2020). Potential of the hydraulic concentric tubular pumping system : master's thesis (Master's thesis). Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:169:076955

Curiš, Sven. "Potential of the hydraulic concentric tubular pumping system : master's thesis." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:169:076955

Curiš, Sven. "Potential of the hydraulic concentric tubular pumping system : master's thesis." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:169:076955

Curiš, S. (2020). 'Potential of the hydraulic concentric tubular pumping system : master's thesis', Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, accessed 03 October 2024, https://urn.nsk.hr/urn:nbn:hr:169:076955

Curiš S. Potential of the hydraulic concentric tubular pumping system : master's thesis [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering; 2020 [cited 2024 October 03] Available at: https://urn.nsk.hr/urn:nbn:hr:169:076955

S. Curiš, "Potential of the hydraulic concentric tubular pumping system : master's thesis", Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:169:076955

Metadata
TitlePotential of the hydraulic concentric tubular pumping system : master's thesis
Title (croatian)Potencijal hidrauličke pumpe s koncentričnim opremanjem tubinga : diplomski rad
AuthorSven Curiš
MentorClemens Langbauer https://orcid.org/0000-0002-0535-8250 (mentor)
MentorDaria Karasalihović-Sedlar (mentor)
Committee memberDaria Karasalihović-Sedlar (predsjednik povjerenstva)
Committee memberSonja Koščak Kolin (član povjerenstva)
Committee memberBorivoje Pašić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
(Department of Petroleum and Gas Engineering and energy)
Zagreb
Defense date and country2020-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mining, Petroleum and Geology Engineering
Petroleum Mining
Abstract
In regards with the global increase in energy demand, especially regarding oil and gas, the industry brings up new innovations daily in order to satisfy the increasing demand. One of the solutions in oil and gas production could be the hydraulic concentric tubular pump, which is invented and tested at the Montanuniversität Leoben, Austria. For a better understanding of this artificial lift system, three scientific works are presented dedicated to this system. Based on them theoretical cases were made and an economic comparison has been made between this system and the sucker rod pumps, which are the most common in the oil industry. After the calculations in set cases, it may be concluded that in general this innovation requires less energy in comparison with the most common artificial lift system, which can postpone the economic limit in oil and gas production and in the end increase the ultimate recovery factor of a reservoir.
Abstract (croatian)
S obzirom na globalni porast potražnje za energijom, prije svega nafte i plina, industrija dolazi svakodnevno do novih inovacija u svrhu zadovoljavanja sve veće potražnje. Jedno od rješenja u proizvodnji nafte i plina može biti i hidraulička pumpa u bušotini s koncentričnim opremanjem tubinga, koja je proizvedena i testirana u Sveučilištu u Leobenu u Austriji. Za bolje razumijevanje samog proizvodnog sustava, u ovom radu predstavljena su tri znanstvena rada posvećena ovom sustavu. Na temelju njih su postavljeni teoretski slučajevi gdje se provela ekonomska usporedba između ovog proizvodnog sustava i dubinskih sisaljki s klipnim šipkama koje se najčešće koriste u naftnoj industriji. Nakon izračuna u postavljenim slučajevima, može se doći do zaključka kako općenito takva inovacija zahtijeva manje energije u odnosu na najčešću proizvodnu opremu, što može dovesti do pomicanja granice ekonomičnosti u proizvodnji nafte te konačno do povećanog iscrpka ležišta.
Keywords
Keywords (croatian)
Languageenglish
URN:NBNurn:nbn:hr:169:076955
Study programmeTitle: Petroleum engineering; specializations in: Petroleum engineering, Energy production and supply, Environmental protection in petroleum engineering
Course: Petroleum engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka naftnog rudarstva (magistar/magistra inženjer/inženjerka naftnog rudarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-10-16 10:01:39