Comparison of mineral processing methods for
metal recycling from waste printed circuit board

Bedeković, Gordan; Premur, Vitomir; Ivić, Anđela

doi:10.29227/IM-2020-01-29

Scientific paper - Original scientific paper

Comparison of mineral processing methods for metal recycling from waste printed circuit board

Inzynieria Mineralna : Journal of the Polish Mineral Engineering Society, 2 (2020), 1(45); 7-12. https://doi.org/10.29227/IM-2020-01-29

Bedeković, Gordan; Premur, Vitomir; Ivić, Anđela

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

APA 6th Edition

Bedeković, G., Premur, V. & Ivić, A. (2020). Comparison of mineral processing methods for metal recycling from waste printed circuit board. Inzynieria Mineralna : Journal of the Polish Mineral Engineering Society, 2. (1(45)), 7-12. doi: 10.29227/IM-2020-01-29

MLA 8th Edition

Bedeković, Gordan, et al. "Comparison of mineral processing methods for metal recycling from waste printed circuit board." Inzynieria Mineralna : Journal of the Polish Mineral Engineering Society, vol. 2, no. 1(45), 2020, pp. 7-12. https://doi.org/10.29227/IM-2020-01-29

Chicago 17th Edition

Bedeković, Gordan, Vitomir Premur and Anđela Ivić. "Comparison of mineral processing methods for metal recycling from waste printed circuit board." Inzynieria Mineralna : Journal of the Polish Mineral Engineering Society 2, no. 1(45) (2020): 7-12. https://doi.org/10.29227/IM-2020-01-29

Harvard

Bedeković, G., Premur, V. and Ivić, A. (2020) 'Comparison of mineral processing methods for metal recycling from waste printed circuit board', Inzynieria Mineralna : Journal of the Polish Mineral Engineering Society, 2(1(45)), pp. 7-12. doi: 10.29227/IM-2020-01-29

Vancouver

Bedeković G, Premur V, Ivić A. Comparison of mineral processing methods for metal recycling from waste printed circuit board. Inzynieria Mineralna : Journal of the Polish Mineral Engineering Society [Internet]. 2020 [cited 2024 November 30];2(1(45)):7-12. doi: 10.29227/IM-2020-01-29

IEEE

G. Bedeković, V. Premur and A. Ivić, "Comparison of mineral processing methods for metal recycling from waste printed circuit board", Inzynieria Mineralna : Journal of the Polish Mineral Engineering Society, vol. 2, no. 1(45), pp. 7-12, 2020. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:169:520516. [Accessed: 30 November 2024]

Cite this item: https://urn.nsk.hr/urn:nbn:hr:169:520516

Metadata

Title (english)	Comparison of mineral processing methods for metal recycling from waste printed circuit board
Title (polish)	Porównanie różnych metod odzysku metali z odpadowych płytek drukowanych
Author	Gordan Bedeković https://orcid.org/0000-0002-1083-5218 MBZ: 205792
Author	Vitomir Premur
Author	Anđela Ivić
Author's institution	University of Zagreb Faculty of Geotechnical Engineering
Author's institution	University of Zagreb Faculty of Mining, Geology and Petroleum Engineering (Department of Mining and Geotechnical Engineering)
Scientific / art field, discipline and subdiscipline	TECHNICAL SCIENCES Mining, Petroleum and Geology Engineering
Scientific / art field, discipline and subdiscipline	TECHNICAL SCIENCES Interdisciplinary Technical Sciences
Abstract (english)	Faster technology development, increasing of living standard and market availability are the main causes of faster obsolescence of electronic devices. Each electronic device contains printed circuit boards that are a valuable source of metal. The paper presents the results of preliminary research of the possibility for using various mineral processing methods in recycling of waste printed circuit boards. The gravity concentration (concentration table and Humphreys spiral concentrator), electrostatic separation and wet magnetic separation were used in this preliminary research and the obtained results were presented in the article.
Abstract (polish)	Szybki rozwój technologii, podwyższenie standardu życia i dostępność na rynku to główne przyczyny szybszego starzenia się urządzeń elektronicznych. Każde urządzenie elektroniczne zawiera płytki drukowane, które są cennym źródłem metalu. W pracy przedstawiono wyniki wstępnych badań możliwości zastosowania różnych metod przeróbki surowców w recyklingu zużytych obwodów drukowanych. W tych wstępnych badaniach wykorzystano wzbogacalnik grawitacyjne (stół wstrząsany i wzbogacalnik spiralny Humphreya), separację elektrostatyczną i separację magnetyczną na mokro, uzyskane wyniki przedstawiono w artykule.
Keywords (english)
Keywords (polish)
Language	english
Publication type	Scientific paper - Original scientific paper
Publication status	Published
Peer review	Peer review - international
Publication version	Published version
Journal title	Inzynieria Mineralna : Journal of the Polish Mineral Engineering Society
Numbering	vol. 2, no. 1(45), pp. 7-12
p-ISSN	1640-4920
DOI	https://doi.org/10.29227/IM-2020-01-29
URN:NBN	urn:nbn:hr:169:520516
Publication	2020
Document URL	http://www.potopk.com.pl/Full_text/2020_v2_full/IM%201-2020-v2-a1.pdf
Type of resource	Text
Access conditions	Open access
Terms of use
Created on	2020-10-29 10:52:24

Search form