prikaz prve stranice dokumenta Utiskivanje otpada iz naftnog rudarstva u bušotine
Access restricted to students and staff of home institution
master's thesis
Utiskivanje otpada iz naftnog rudarstva u bušotine
diplomski rad
Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2014. urn:nbn:hr:169:659207
Marinić, Maja
University of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
Department of Petroleum and Gas Engineering and energy

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

Marinić, M. (2014). Utiskivanje otpada iz naftnog rudarstva u bušotine : diplomski rad (Master's thesis). Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:169:659207

Marinić, Maja. "Utiskivanje otpada iz naftnog rudarstva u bušotine : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2014. https://urn.nsk.hr/urn:nbn:hr:169:659207

Marinić, Maja. "Utiskivanje otpada iz naftnog rudarstva u bušotine : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2014. https://urn.nsk.hr/urn:nbn:hr:169:659207

Marinić, M. (2014). 'Utiskivanje otpada iz naftnog rudarstva u bušotine : diplomski rad', Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, accessed 25 December 2024, https://urn.nsk.hr/urn:nbn:hr:169:659207

Marinić M. Utiskivanje otpada iz naftnog rudarstva u bušotine : diplomski rad [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering; 2014 [cited 2024 December 25] Available at: https://urn.nsk.hr/urn:nbn:hr:169:659207

M. Marinić, "Utiskivanje otpada iz naftnog rudarstva u bušotine : diplomski rad", Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Zagreb, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:169:659207

Metadata
TitleUtiskivanje otpada iz naftnog rudarstva u bušotine : diplomski rad
Title (english)Waste injection in petroleum industry : master's thesis
AuthorMaja Marinić
MentorNediljka Gaurina-Međimurec (mentor)
Committee memberNediljka Gaurina-Međimurec
Committee memberBorivoje Pašić
Committee memberLidia Hrnčević
GranterUniversity of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
(Department of Petroleum and Gas Engineering and energy)
Zagreb
Defense date and country2014-09-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mining, Petroleum and Geology Engineering
Petroleum Mining
Abstract
U radu su opisani procesi i načini utiskivanja otpada u podzemlje. Otpad je moguće utiskivati kroz tubing ili kroz prstenasti prostor i perforacije u utisnu formaciju. U utisne formacije je moguće utiskivati fluide bez čvrstih čestica ili sa čvrstim česticama, takvi fluidi se još nazivaju i otpadne kaše. Osim u iscrpljena ležišta, otpad je moguće utiskivati u kaverne izrađene u ležištima soli. Problemi kod utiskivanja javljaju se neadekvatnog sastava otpadne kaše te loše odabranih tlakova i brzina utiskivanja. Da bi se ti problemi izbjegli potrebno je pratiti proces utiskivanja. Metode praćenja proces također su opisane u radu. Za uspješno i sigurno odlaganje otpada potrebno je precizno odabrati geološku formaciju, u kojoj uvjeti pogoduju utiskivanju kaše. Utiskivanjem otpadne kaše u iscrpljeno ležište ugljikovodika, isti se vraća u područje gdje je nastao. Utiskivanje otpada u bušotine ima široku primjenu u svijetu, pa i kod nas. Najveći broj utisnih bušotina ima Aljaska a to je 129 bušotina, a slijede ju Meksički zaljev i Sjeverno more.
Abstract (english)
Abstract: This thesis describes processes and methods of waste injection. Waste can me injected into injection formation through tubing or annular.. It is possible to inject into formation fluids without solids or fluids withs solids, these fluids are also known as the waste slurrys. Except deplated wells, it is possible to inject oil waste into caverns in salt deposites. Because of inadequate composition of slurry, and incorrect selected pressures and velocitys during injection problems may occure. It is necessary to monitor the process of injection to avoid that problems. Monitoring methods are also describes in this thesis. For sucessful and safe waste disposal is necessary to accurately select formation for waste injection. Waste injection is widely used worldwide and in Croatia. Alaska takes first place in a number of the injection wells with total of 129 wells, followed by Gulf of Mexico and North Sea.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:169:659207
Study programmeTitle: Petroleum Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka naftnog rudarstva (magistar/magistra inženjer/inženjerka naftnog rudarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-01-13 12:10:26