prikaz prve stranice dokumenta Utjecaj mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača
Access restricted to students and staff of home institution
master's thesis
Utjecaj mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača
diplomski rad
Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2013. urn:nbn:hr:169:941694
Čugura, Ivan
University of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
Department of Mining and Geotechnical Engineering

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

Čugura, I. (2013). Utjecaj mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača : diplomski rad (Master's thesis). Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:169:941694

Čugura, Ivan. "Utjecaj mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2013. https://urn.nsk.hr/urn:nbn:hr:169:941694

Čugura, Ivan. "Utjecaj mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2013. https://urn.nsk.hr/urn:nbn:hr:169:941694

Čugura, I. (2013). 'Utjecaj mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača : diplomski rad', Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, accessed 14 May 2024, https://urn.nsk.hr/urn:nbn:hr:169:941694

Čugura I. Utjecaj mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača : diplomski rad [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering; 2013 [cited 2024 May 14] Available at: https://urn.nsk.hr/urn:nbn:hr:169:941694

I. Čugura, "Utjecaj mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača : diplomski rad", Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Zagreb, 2013. Available at: https://urn.nsk.hr/urn:nbn:hr:169:941694

Metadata
TitleUtjecaj mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača : diplomski rad
Title (english)Effect of explosive charge mass, material lining and standoff distance on the cutting depth of linear shaped charges : master's thesis
AuthorIvan Čugura
MentorMario Dobrilović (mentor)
Committee memberMario Dobrilović
Committee memberŽelimir Veinović
Committee memberZvonimir Ester
GranterUniversity of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
(Department of Mining and Geotechnical Engineering)
Zagreb
Defense date and country2013-04-29, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mining, Petroleum and Geology Engineering
Mining
Abstract
Kumulativni eksplozivni naboji kod kojih je jedna dimenzija značajno veća od ostalih nazivaju se linijskim (linearnim) kumulativnim rezačima. Linijski kumulativni rezači se učinkovito primjenjuju u različitim granama industrije poput rudarstva, građevinarstva, naftne, svemirske i vojne industrije, pri razminiranju i vatrogastvu. U diplomskom radu izvršeno je ispitivanje utjecaja mase eksplozivnog punjenja, materijala obloge i odmaka na dubinu reza linijskih kumulativnih rezača. Pri tom ispitivanju uzeti su samo oni čimbenici za koje je ocijenjeno da imaju najveći utjecaj na dubinu reza linijskih kumulativnih rezača.
Abstract (english)
Abstract: Explosive charges in which one dimension is significantly larger than the others are called linear shaped charges. Line cumulative charges effectively are applied in various industries such as mining, construction, petroleum, space and defense industries, in mine clearance and fire service. In this thesis we have examined the influence of the explosive charge mass, the material lining and standoff distance on the cutting depth of linear shaped charger. During this test only those factors which are judged to have the greatest impact on the cutting depth of linear shaped charge were taken.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:169:941694
Study programmeTitle: Mining
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka rudarstva (magistar/magistra inženjer/inženjerka rudarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-01-19 11:40:35