prikaz prve stranice dokumenta Razvoj tlakova tijekom ugušivanja bušotine bušaćom i inženjerskom metodom
  Download
PDF 1.34 MB
master's thesis
Razvoj tlakova tijekom ugušivanja bušotine bušaćom i inženjerskom metodom
diplomski rad
Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2016. urn:nbn:hr:169:348457
Grubeša, Mislav
University of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
Department of Petroleum and Gas Engineering and energy

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

Grubeša, M. (2016). Razvoj tlakova tijekom ugušivanja bušotine bušaćom i inženjerskom metodom : diplomski rad (Master's thesis). Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:169:348457

Grubeša, Mislav. "Razvoj tlakova tijekom ugušivanja bušotine bušaćom i inženjerskom metodom : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2016. https://urn.nsk.hr/urn:nbn:hr:169:348457

Grubeša, Mislav. "Razvoj tlakova tijekom ugušivanja bušotine bušaćom i inženjerskom metodom : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2016. https://urn.nsk.hr/urn:nbn:hr:169:348457

Grubeša, M. (2016). 'Razvoj tlakova tijekom ugušivanja bušotine bušaćom i inženjerskom metodom : diplomski rad', Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, accessed 06 September 2024, https://urn.nsk.hr/urn:nbn:hr:169:348457

Grubeša M. Razvoj tlakova tijekom ugušivanja bušotine bušaćom i inženjerskom metodom : diplomski rad [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering; 2016 [cited 2024 September 06] Available at: https://urn.nsk.hr/urn:nbn:hr:169:348457

M. Grubeša, "Razvoj tlakova tijekom ugušivanja bušotine bušaćom i inženjerskom metodom : diplomski rad", Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:169:348457

Metadata
TitleRazvoj tlakova tijekom ugušivanja bušotine bušaćom i inženjerskom metodom : diplomski rad
Title (english)Pressure profile during driller's and wait & weight well kill method : master’s thesis
AuthorMislav Grubeša
MentorZdenko Krištafor (mentor)
Committee memberZdenko Krištafor
Committee memberNediljka Gaurina-Međimurec
Committee memberBorivoje Pašić
GranterUniversity of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
(Department of Petroleum and Gas Engineering and energy)
Zagreb
Defense date and country2016-02-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mining, Petroleum and Geology Engineering
Petroleum Mining
Abstract
Svi postupci kontrole tlaka oslanjaju se na rano prepoznavanje dotoka i zatvaranje bušotine kako bi se spriječio daljni dotok. Nakon zatvaranja bušotine, pristupa se ugušivanju bušotine različitim metodama, najčešće bušaćom ili inženjerskom metodom kontrole tlaka. Poznate su prednosti i nedostaci obje metode, sa bušaćom metodom se može započeti odmah nakon očitanja tlakova, dok se inženjerskom metodom razvijaju manji tlakovi na ušću bušotine i u području pete kolone. Razvoj tlakova tijekom ugušivanja može se pratiti na temelju karakerističnih očitanja: početnog cirkulacijskog tlaka, konačnog cirkulacijskog tlaka i tlaka na ušću bušotine. Izrađenim modelom izračunati su karakteristični tlakovi u ovisnosti o hodovima pumpe nakon zatvaranja bušotine. Izrađeni model uz nekoliko pretpostavki potvrđuje razvoj manjih tlakova tijekom provedbe inženjerske metode. U stvarnosti, to ne mora nužno biti slučaj.
Abstract (english)
Abstract: Well killing methods rely on early kick detection and shutting in the well to prevent any further influx into wellbore. When the well is shut in, appropriate well kill method is selected, most commonly, driller's method or wait & weight method. Advantages and disadvantages of both methods are known, well kill procedure using driller's method can start immediately, while using wait & weight method lower pressure in the annulus are developed. Pressure profile can be tracked with characteristic pressures during well kill procedure: initial circulation pressure, final circulation pressure and casing pressure. Characteristic pressures are calculated using pressure model for well kill procedures, with few assumptions. Pressure model confirms lower casing pressures during wait & weight method, while in real situation, that does not have to be case.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:169:348457
Study programmeTitle: Petroleum engineering; specializations in: Petroleum engineering, Energy production and supply, Environmental protection in petroleum engineering
Course: Petroleum engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka naftnog rudarstva (magistar/magistra inženjer/inženjerka naftnog rudarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2016-03-02 14:10:24