prikaz prve stranice dokumenta Metode umjeravanja uređaja za mjerenje brzine detonacije
Access restricted to students and staff of home institution
master's thesis
Metode umjeravanja uređaja za mjerenje brzine detonacije
diplomski rad
Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2010. urn:nbn:hr:169:453619
Babić, Ivan
University of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
Department of Mining and Geotechnical Engineering

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

Babić, I. (2010). Metode umjeravanja uređaja za mjerenje brzine detonacije : diplomski rad (Master's thesis). Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:169:453619

Babić, Ivan. "Metode umjeravanja uređaja za mjerenje brzine detonacije : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2010. https://urn.nsk.hr/urn:nbn:hr:169:453619

Babić, Ivan. "Metode umjeravanja uređaja za mjerenje brzine detonacije : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2010. https://urn.nsk.hr/urn:nbn:hr:169:453619

Babić, I. (2010). 'Metode umjeravanja uređaja za mjerenje brzine detonacije : diplomski rad', Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, accessed 14 May 2024, https://urn.nsk.hr/urn:nbn:hr:169:453619

Babić I. Metode umjeravanja uređaja za mjerenje brzine detonacije : diplomski rad [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering; 2010 [cited 2024 May 14] Available at: https://urn.nsk.hr/urn:nbn:hr:169:453619

I. Babić, "Metode umjeravanja uređaja za mjerenje brzine detonacije : diplomski rad", Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Zagreb, 2010. Available at: https://urn.nsk.hr/urn:nbn:hr:169:453619

Metadata
TitleMetode umjeravanja uređaja za mjerenje brzine detonacije : diplomski rad
Title (english)Methods calibration devices for measurement detonation velocity : master's thesis
AuthorIvan Babić
MentorMario Dobrilović (mentor)
Committee memberMario Dobrilović
Committee memberZvonimir Ester
Committee memberŽelimir Veinović
GranterUniversity of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
(Department of Mining and Geotechnical Engineering)
Zagreb
Defense date and country2010-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mining, Petroleum and Geology Engineering
Mining
Abstract
U magistarskom radu opisane su metode umjeravanja uređaja za mjerenje brzine detonacije. Ispitivanja su obavljena prema zahtjevima norme HRN EN 13763-15:2007. Vrijednost brzine detonacije neizravno pruža informacije o moći eksploziva. Vrijeme kašnjenja je od velike važnosti za detonatore i ostala inicijalna sredstva. Određivanje ovih parametara se vrši preko elektrooptičke metode mjerenjem vremena intervala. U laboratoriju za ispitivanje eksplozivnih tvari razvijena je metoda umjeravanja instrumenta manje točnosti (elektronički sat) uz pomoć instrumenta veće točnosti (digitalni osciloskop). Rad opisuje postavu i uvjete mjerenja, tip uređaja i potrebne dodatke za komparativnu metodu umjeravanja, opis i rezultate jednokanalne i dvokanalne metode mjerenja i mjernu nesigurnost.
Abstract (english)
Abstract: The thesis describes the methods of calibration equipment for measuring velocity of detonation. Tests were carried out according to standard EN 13763-15:2007. The value of detonation velocity indirectly provides information about the power of explosives. The time delay is of great importance to the detonators and other initial funds. Determination of these parameters is done through the electro-optic methods of measuring the time interval. In the laboratory for testing of explosives developed a method less accurate calibrated instrument (electronic clock) with the help of greater precision instrument (digital oscilloscope). This paper describes the setup and measurement conditions, type of equipment and necessary accessories for the comparative method of calibration, a description of the results of single and two channel measurement methods and measurement uncertainty.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:169:453619
Study programmeTitle: Mining Engineering; specializations in: Mining engineering, Geotechnical engineering, Waste treatment and disposal
Course: Mining engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka rudarstva (magistar/magistra inženjer/inženjerka rudarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-03-29 07:47:51