prikaz prve stranice dokumenta Primjena kuta sipanja i utjecaj promjera pri ispitivanju metodom cilindra
  Download
PDF 1.6 MB
master's thesis
Primjena kuta sipanja i utjecaj promjera pri ispitivanju metodom cilindra
diplomski rad
Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2018. urn:nbn:hr:169:857118
Gaura, Antonela
University of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
Department of Mining and Geotechnical Engineering

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

Gaura, A. (2018). Primjena kuta sipanja i utjecaj promjera pri ispitivanju metodom cilindra : diplomski rad (Master's thesis). Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:169:857118

Gaura, Antonela. "Primjena kuta sipanja i utjecaj promjera pri ispitivanju metodom cilindra : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:169:857118

Gaura, Antonela. "Primjena kuta sipanja i utjecaj promjera pri ispitivanju metodom cilindra : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:169:857118

Gaura, A. (2018). 'Primjena kuta sipanja i utjecaj promjera pri ispitivanju metodom cilindra : diplomski rad', Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, accessed 25 December 2024, https://urn.nsk.hr/urn:nbn:hr:169:857118

Gaura A. Primjena kuta sipanja i utjecaj promjera pri ispitivanju metodom cilindra : diplomski rad [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering; 2018 [cited 2024 December 25] Available at: https://urn.nsk.hr/urn:nbn:hr:169:857118

A. Gaura, "Primjena kuta sipanja i utjecaj promjera pri ispitivanju metodom cilindra : diplomski rad", Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:169:857118

Metadata
TitlePrimjena kuta sipanja i utjecaj promjera pri ispitivanju metodom cilindra : diplomski rad
Title (english)Application of the angle of repose and influence of diameter in cylinder method testing : master’s thesis
AuthorAntonela Gaura
MentorMario Klanfar (mentor)
MentorVjekoslav Herceg (pomoć pri izradi, neposredni voditelj)
Committee memberMario Klanfar (predsjednik povjerenstva)
Committee memberDubravko Domitrović (član povjerenstva)
Committee memberTomislav Korman (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
(Department of Mining and Geotechnical Engineering)
Zagreb
Defense date and country2018-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mining, Petroleum and Geology Engineering
Mining
Abstract
U ovom radu objašnjena je široka primjena kuta sipanja u raznim područjima. Cilj rada je utvrditi utjecaj promjera cilindra na kut sipanja materijala. Provedena su laboratorijska ispitivanja na 6 različitih promjera cilindra pomoću dvije metode. Prva metoda odnosi se na uvijek istu visinu uzorka, a druga na isti omjer visine i promjera. Nakon ispitivanja rađena je regresijska analiza te usporedba dobivenih grafičkih podataka.
Abstract (english)
This thesis shows various application of the angle of repose. The aim of the thesis is to determine the influence of cylinder diameter on the angle of repose of the material. Laboratory tests were carried out on 6 different cylinder diameters using two conditions of research. The first condition applies to constant height of the sample and the second to constant height and diameter ratio. A regression analysis was performed after the tests and a comparison of the obtained graphical data is shown.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:169:857118
Study programmeTitle: Mining Engineering; specializations in: Mining engineering, Geotechnical engineering, Waste treatment and disposal
Course: Geotechnical engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka rudarstva (magistar/magistra inženjer/inženjerka rudarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2018-10-25 11:23:35