prikaz prve stranice dokumenta Određivanje kuta stošca pri ispitivanju kuta sipanja metodom cilindra
  Download
PDF 1.8 MB
master's thesis
Određivanje kuta stošca pri ispitivanju kuta sipanja metodom cilindra
diplomski rad
Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2018. urn:nbn:hr:169:602689
Kostrić, Stjepan
University of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
Department of Mining and Geotechnical Engineering

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

Kostrić, S. (2018). Određivanje kuta stošca pri ispitivanju kuta sipanja metodom cilindra : diplomski rad (Master's thesis). Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:169:602689

Kostrić, Stjepan. "Određivanje kuta stošca pri ispitivanju kuta sipanja metodom cilindra : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:169:602689

Kostrić, Stjepan. "Određivanje kuta stošca pri ispitivanju kuta sipanja metodom cilindra : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:169:602689

Kostrić, S. (2018). 'Određivanje kuta stošca pri ispitivanju kuta sipanja metodom cilindra : diplomski rad', Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, accessed 16 February 2025, https://urn.nsk.hr/urn:nbn:hr:169:602689

Kostrić S. Određivanje kuta stošca pri ispitivanju kuta sipanja metodom cilindra : diplomski rad [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering; 2018 [cited 2025 February 16] Available at: https://urn.nsk.hr/urn:nbn:hr:169:602689

S. Kostrić, "Određivanje kuta stošca pri ispitivanju kuta sipanja metodom cilindra : diplomski rad", Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:169:602689

Metadata
TitleOdređivanje kuta stošca pri ispitivanju kuta sipanja metodom cilindra : diplomski rad
Title (english)Assesment of the angle of cone in cylinder method testing : master’s thesis
AuthorStjepan Kostrić
MentorMario Klanfar (mentor)
Committee memberMario Klanfar (predsjednik povjerenstva)
Committee memberDubravko Domitrović (član povjerenstva)
Committee memberIvan Medved (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
(Department of Mining and Geotechnical Engineering)
Zagreb
Defense date and country2018-10-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mining, Petroleum and Geology Engineering
Mining
Abstract
U ovom radu objašnjene su različite metode mjerenja kuta sipanja materijala. Pomoću kutomjera, podne šablone, 2D i 3D fotografije izvedena su mjerenja kuta te su opisane i metode formiranja kutova sipanja materijala. Za potrebe usporedbe mjerenja kutova korišteni su referentni stošci različitih kutova od 25°, 28°, 35°. Referentni stošci izrađeni su pomoću papira i 3D ispisivanjem. Mjerenja su izvršena i na stvarnoj gomili formiranoj pomoću metode cilindra. U radu su prikazani rezultati mjerenja kuta sipanja na referentnim stošcima, te na stvarnim hrpama. Poseban naglasak pri mjerenju kutova stavljen je na metodu 3D mjerenje kuta.
Abstract (english)
This thesis describes different angle measuring methods of angle of repose. Angle measurements were performed with a usage of protractor, floor template, 2D and 3D photographs. For comparison, there were used reference cone of different angles 25°, 28°, 35°. Reference cones were made with paper and 3D printing while measurement were made on real pile formed by The cylinder method. In thesis are presented the results of measuring angles of repose and on real piles. When measuring angles a special emphasis was placed on 3D method of measuring angles.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:169:602689
Study programmeTitle: Mining Engineering; specializations in: Mining engineering, Geotechnical engineering, Waste treatment and disposal
Course: Geotechnical engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka rudarstva (magistar/magistra inženjer/inženjerka rudarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2018-11-08 13:03:56