prikaz prve stranice dokumenta Utjecaj visine uzorka na kut sipanja dolomita metodom cilindra
  Download
PDF 1.21 MB
master's thesis
Utjecaj visine uzorka na kut sipanja dolomita metodom cilindra
diplomski rad
Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2019. urn:nbn:hr:169:498762
Cvitković, Mirna
University of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
Department of Mining and Geotechnical Engineering

Institutional repository: Faculty of Mining, Geology and Petroleum Engineering Repository, University of Zagreb

Cite this document

Cvitković, M. (2019). Utjecaj visine uzorka na kut sipanja dolomita metodom cilindra : diplomski rad (Master's thesis). Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:169:498762

Cvitković, Mirna. "Utjecaj visine uzorka na kut sipanja dolomita metodom cilindra : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:169:498762

Cvitković, Mirna. "Utjecaj visine uzorka na kut sipanja dolomita metodom cilindra : diplomski rad." Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:169:498762

Cvitković, M. (2019). 'Utjecaj visine uzorka na kut sipanja dolomita metodom cilindra : diplomski rad', Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, accessed 25 December 2024, https://urn.nsk.hr/urn:nbn:hr:169:498762

Cvitković M. Utjecaj visine uzorka na kut sipanja dolomita metodom cilindra : diplomski rad [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering; 2019 [cited 2024 December 25] Available at: https://urn.nsk.hr/urn:nbn:hr:169:498762

M. Cvitković, "Utjecaj visine uzorka na kut sipanja dolomita metodom cilindra : diplomski rad", Master's thesis, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:169:498762

Metadata
TitleUtjecaj visine uzorka na kut sipanja dolomita metodom cilindra : diplomski rad
Title (english)Influence of sample height on angle of repose of dolomite tested by cylinder method : master’s thesis
AuthorMirna Cvitković
MentorMario Klanfar (mentor)
MentorVjekoslav Herceg (pomoć pri izradi, neposredni voditelj)
Committee memberMario Klanfar (predsjednik povjerenstva)
Committee memberDubravko Domitrović (član povjerenstva)
Committee memberTomislav Korman (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mining, Geology and Petroleum Engineering
(Department of Mining and Geotechnical Engineering)
Zagreb
Defense date and country2019-02-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mining, Petroleum and Geology Engineering
Mining
Abstract
Tema i svrha rada je usporediti istraživanja kuta sipanja materijala i njihove dobivene vrijednosti. Opisana je metoda cilindra, njena provedba i dobiveni rezultati s različitim visinama materijala unutar šupljeg cilindra. Isti su obrađeni i analizirani. Prema više autora, dobivena je ovisnost iznosa kuta sipanja o frakciji materijala, obliku zrna, podlozi na koju se rasipa i brzini podizanja cilindra. Veći je kod materijala s manjim ili nikakvim udjelom sitnih čestica, uglatih zrna, rasipan na podlogu veće hrapavosti manjim brzinama. Naša ispitivanja su pokazala minimalnu promjenu kuta sipanja s porastom visine uzorka u cilindru za frakciju 2/4, dok je za frakciju 0/4 s porastom visine uzorka kut sipanja padao.
Abstract (english)
Theme and purpose of this thesis is to compare researches of angle of repose and their gained values. Cylinder method is described, implementation and results gained with different heights of material inside of the hollow cylinder. They are processed and analized. According to several authors, the dependence of the value of angle of repose on the fraction of the material, grain shape, friction of the base and cylinder lifting speed was obtained. It is higher in materials with a small amount or without fine particles, angular grain, poured on the base with a higher roughness at lower speeds. Our tests showed a slight change in the angle of repose with the increase of the sample height with fraction 2/4, while the angle was falling with fraction 0/4 with the increase in the height of the sample.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:169:498762
Study programmeTitle: Mining Engineering; specializations in: Mining engineering, Geotechnical engineering, Waste treatment and disposal
Course: Geotechnical engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka rudarstva (magistar/magistra inženjer/inženjerka rudarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-04-03 09:03:50