prikaz prve stranice dokumenta Postupak toplinske obrade strojnog dijela SF.18- DT.27
Access restricted to students and staff of home institution
master's thesis
Postupak toplinske obrade strojnog dijela SF.18- DT.27
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:432482
Fićković, Suzana
University of Rijeka
Faculty of Engineering
Department of Materials Science and Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Fićković, S. (2018). Postupak toplinske obrade strojnog dijela SF.18- DT.27 (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:432482

Fićković, Suzana. "Postupak toplinske obrade strojnog dijela SF.18- DT.27." Master's thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:432482

Fićković, Suzana. "Postupak toplinske obrade strojnog dijela SF.18- DT.27." Master's thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:432482

Fićković, S. (2018). 'Postupak toplinske obrade strojnog dijela SF.18- DT.27', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 04 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:432482

Fićković S. Postupak toplinske obrade strojnog dijela SF.18- DT.27 [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 November 04] Available at: https://urn.nsk.hr/urn:nbn:hr:190:432482

S. Fićković, "Postupak toplinske obrade strojnog dijela SF.18- DT.27", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:432482

Metadata
TitlePostupak toplinske obrade strojnog dijela SF.18- DT.27
Title (english)Heat treating process of workpiece SF.18- DT.27
AuthorSuzana Fićković
MentorDario Iljkić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRoberto Žigulić (član povjerenstva)
Committee memberOzren Bukovac (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Materials Science and Engineering)
Rijeka
Defense date and country2018-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Toplinskom obradom nazivamo postupke djelovanja temperature na materijal u svrhu mijenjanja njegove mikrostrukture, a samim time i njegovih svojstava. Posebna pozornost u ovom radu stavljena je na postupak toplinske obrade cementiranjem prilikom koje se materijal prvo pougljičava, zatim kali, a nakon toga niskotemperaturno popušta. Čelici pogodni za cementiranje sadrže maksimalno 0,25 % ugljika, pa im se iz tog razloga površinski sloj mora obogatiti ugljikom. Kaljenjem se dobivaju zahtjevana svojstva poput otpornosti na trošenje, otpornosti na udarna opterećenja i veća izdržljivost. Tvrdoća postupka ispituje se različitim metodama od kojih najveću primjenu imaju Vickersova i Knoopova. Po završetku postupka cementiranja tvrdoća materijal može iznositi od 60 do 64 HRC. Čelike za cementiranje pronalazimo kod izrade vratila, osovina, zupčanika i drugih strojnih dijelova kod kojih su potrebna navedena svojsta.
Abstract (english)
Heat treatment is a process of temperature action on a material for the purpose of changing its microstructure and therefore its properties. Special attention has been putted on cementing process where material is first carburized, then tempered to reach the heardness and after that follows a low temperature realase. Steels suitable for cementing process contain up to 0,25 % of carbon and therefore surfuce has to be enriched with carbon. By tempering process desired properties such as wear resistance and shock loads are achived. Hardness can be tested by various methods, but in practice mostly used methods are Vickers and Knoop. After cementing, results on hardness are between 60 and 64 HRC. Cementing steels are use din manufacturers for shafts, gears and similar machine parts were mentioned properties are needed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:432482
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-10-23 08:55:24