prikaz prve stranice dokumenta Utjecaj geometrije rešetke na gubitke strujanja - slučaj 2
Access restricted to students and staff of home institution
undergraduate thesis
Utjecaj geometrije rešetke na gubitke strujanja - slučaj 2
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:531980
Đukić, Dora
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Fluid Mechanics and Hydraulic Machines

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Đukić, D. (2018). Utjecaj geometrije rešetke na gubitke strujanja - slučaj 2 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:531980

Đukić, Dora. "Utjecaj geometrije rešetke na gubitke strujanja - slučaj 2." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:531980

Đukić, Dora. "Utjecaj geometrije rešetke na gubitke strujanja - slučaj 2." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:531980

Đukić, D. (2018). 'Utjecaj geometrije rešetke na gubitke strujanja - slučaj 2', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 11 January 2025, https://urn.nsk.hr/urn:nbn:hr:190:531980

Đukić D. Utjecaj geometrije rešetke na gubitke strujanja - slučaj 2 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2025 January 11] Available at: https://urn.nsk.hr/urn:nbn:hr:190:531980

D. Đukić, "Utjecaj geometrije rešetke na gubitke strujanja - slučaj 2", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:531980

Metadata
TitleUtjecaj geometrije rešetke na gubitke strujanja - slučaj 2
Title (english)Trash-rack geometry influence on fluid flow head losses - case 2
AuthorDora Đukić
MentorZoran Čarija (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Fluid Mechanics and Hydraulic Machines)
Rijeka
Defense date and country2018-09-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu promatrali su se gubici prilikom opstrujavanja rešetke na ulazu u hidroelektranu. Gubici se očituju padom tlaka na ulaznim i izlaznim površinama rešetki. Zadana su četiri tipa rešetki. U svakom se slučaju proučavalo strujanje na šest spojenih rešetki različitih širina. Ispitivale su se tri različite ulazne brzine fluida na svakom tipu rešetki, 1 m/s, 5 m/s i 10 m/s, a ti tipovi su bili širina 4 mm, 8 mm, 16 mm i 24 mm. Za početak je bilo potrebno izraditi geometriju rešetki u AutoCADu te Ansys Workbench Design Modeleru te na temelju izrađenih geometrija kreirati numeričke mreže koje su potrebne za provedbu simulacija. Mreže su izrađene u Ansys Meshu, a simulacije su provedene u Fluentu. Na temelju provedenih simulacija dobiveni su rezultati koji su prikazani u poglavlju Analiza rezultata.
Abstract (english)
In this final paper, main concern was to observe losses on the trash rack at the entrance to the hydroelectric power plant. The losses are manifested by the pressure drop on the input and output surface of trash racks. There are four types of trash racks. In each case, the flow of six connected racks, of different widths was studied. Three different inlet fluid velocities were tested on each type of trash rack, 1 m/s, 5 m/s and 10 m/s, and the types were 4 mm, 8 mm, 16 mm and 24 mm wide. To begin, it was needed to create geometric designs in AutoCAD and Ansys Workbench Design Modeler, and to create numerical mesh for simulation implementation based on geometry. The meshes were made in Ansys Mesh, and the simulations were conducted in Fluent. Based on the simulations carried out, the results are presented in the Results Analysis section.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:531980
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-10-31 10:30:05