prikaz prve stranice dokumenta Postupak toplinske obrade strojnog dijela SS.18-PT.81
Access restricted to students and staff of home institution
undergraduate thesis
Postupak toplinske obrade strojnog dijela SS.18-PT.81
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:973409
Škara, Stipe
University of Rijeka
Faculty of Engineering
Department of Materials Science and Engineering
Section of Materials Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Škara, S. (2018). Postupak toplinske obrade strojnog dijela SS.18-PT.81 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:973409

Škara, Stipe. "Postupak toplinske obrade strojnog dijela SS.18-PT.81." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:973409

Škara, Stipe. "Postupak toplinske obrade strojnog dijela SS.18-PT.81." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:973409

Škara, S. (2018). 'Postupak toplinske obrade strojnog dijela SS.18-PT.81', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 28 August 2024, https://urn.nsk.hr/urn:nbn:hr:190:973409

Škara S. Postupak toplinske obrade strojnog dijela SS.18-PT.81 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 August 28] Available at: https://urn.nsk.hr/urn:nbn:hr:190:973409

S. Škara, "Postupak toplinske obrade strojnog dijela SS.18-PT.81", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:973409

Metadata
TitlePostupak toplinske obrade strojnog dijela SS.18-PT.81
Title (english)Heat treating process of workpiece SS.18-PT.81
AuthorStipe Škara
MentorDario Iljkić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Materials Science and Engineering)
(Section of Materials Engineering)
Rijeka
Defense date and country2018-09-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu prikazana je toplinska obrada metala i objašnjeni su najčešći postupci toplinske obrade. Prikazane su razne mikrostrukture čelika i objašnjena je promjena austenita u perlit, matrenzit i bainit. Objašnjena je prokaljivost i zakaljivost, te Jominyjeva metoda kojom se prokaljivost ispituje. Objašnjeno je popuštanje čelika i navedene su metode kojima se tvrdoća čelika mjeri. Zadnji dio rada prikazuje toplinsku obradu strojnog dijela koja se sastoji od kaljenja, gašenja i niskotemperaturnog popuštanja te je izmjerena tvrdoća na početku i na kraju postupka.
Abstract (english)
This paper shows heat treating process of metals and explains most common heat treating processes. It shows different kinds of steel microstructures and explains the changes from austenite to pearlite, martensite and bainite. It explains hardenability of steel and the Jominy endquench test used to test hardenability. It explains stress relieving and the methods used to measure hardness. The last part of this paper shows the heat treatment of a workpiece that consists of annealing, quenching and stress relieving, workpiece hardness is measured at the beginning and at the end of the process.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:973409
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-11-21 09:29:17