prikaz prve stranice dokumenta Automatizirani sustav za navodnjavanje temeljen na Arduinu
Access restricted to students and staff of home institution
undergraduate thesis
Automatizirani sustav za navodnjavanje temeljen na Arduinu
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:618977
Batel, Ana
University of Rijeka
Faculty of Engineering
Department of Automation and Electronics
Section of Electronics, Robotics and Automation

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Batel, A. (2018). Automatizirani sustav za navodnjavanje temeljen na Arduinu (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:618977

Batel, Ana. "Automatizirani sustav za navodnjavanje temeljen na Arduinu." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:618977

Batel, Ana. "Automatizirani sustav za navodnjavanje temeljen na Arduinu." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:618977

Batel, A. (2018). 'Automatizirani sustav za navodnjavanje temeljen na Arduinu', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:618977

Batel A. Automatizirani sustav za navodnjavanje temeljen na Arduinu [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:618977

A. Batel, "Automatizirani sustav za navodnjavanje temeljen na Arduinu", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:618977

Metadata
TitleAutomatizirani sustav za navodnjavanje temeljen na Arduinu
Title (english)Automatized Irrigation System Based on Arduino
AuthorAna Batel
MentorJonatan Lerga (mentor)
Committee memberKristijan Lenac (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Automation and Electronics)
(Section of Electronics, Robotics and Automation)
Rijeka
Defense date and country2018-11-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Computing
Abstract
U izradi ovog rada koristila se NodeMCU razvojna pločica koja koristi ESP8266 sistemna-čipu kao mikrokontroler. Razvojna pločica je zatim povezana sa senzorom za vlažnost tla te ventilom za vodu. Da bi se realizirao automatizirani sustav navodnjavanja, potrebno je ventil spojiti na slavinu te njegovim paljenjem i gašenjem upravljati putem MOSFET upravljačke elektrode koja prima signale s pina pločice. Uz sklopovlje, realizirana je i odgovarajuća programska podrška koja se sastoji od poslužiteljskog i klijentskog dijela. Poslužiteljski dio pisan je u Arduino programskom jeziku. Njegova svrha je posluživanje web stranica sa SPIFFS datotečnog sustava, primanje JSON informacija s klijentskog dijela, njihova pohrana te upravljanje pinovima mikrokontrolera. Klijentski dio se izvodi u web pregledniku korisnika te je pretežno pisan u JavaScript jeziku te koristeći WebSockets API. Kroz sučelje je moguće odabrati jedan od tri načina rada: automatizirani rad upravljan vremenom, automatizirani rad upravljan razinom vlažnosti tla te ručno paljenje i gašenje navodnjavanja. Korisnik ima mogućnost brisanja i dodavanja vremena navodnjavanja po danima te biranje razina vlažnosti na koje se sustav pali. Ostvarena je mogućnost pristupa s udaljenih IP adresa postavljanjem fiksne privatne adrese ESP modula te korištenjem dinamičkog DNS-a i prosljeđivanjem portova.
Abstract (english)
The hardware part of this thesis is based on NodeMCU development board that uses ESP8266 system-on-chip as its microcontroller. The board is then connected to the soil humidity sensor and a solenoid valve. The functional system requires the valve to be connected to the water pipe. The valve is turned on and off through MOSFET gate receiving signals from a pin on the board. The accompanying software can be divided into a server side and a client side. The server side was written using Arduino programming language. Its purpose is to serve web pages from SPIFFS file system, receive JSON information from the client side and manipulate it, and microcontroller pin management. The client side runs in a user's web browser and is mainly written in JavaScript language, using WebSockets API. Through the client side, a user can choose between three modes of operation: automated irrigation based on previously set time frames, automated irrigation based on previously set humidity levels and a manual mode where the user turns the system on and off at any point in time. A user can add and remove irrigation time frames and choose humidity levels when the irrigation turns on. It is possible to access the system from a remote IP address by setting up a fixed private IP address of the ESP module and by using dynamic DNS alongside port forwarding.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:618977
Study programmeTitle: Computer Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka računarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka računarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-11-26 08:15:24