prikaz prve stranice dokumenta Prednabijanje Ottovog motora
Access restricted to students and staff of home institution
master's thesis
Prednabijanje Ottovog motora
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:584843
Buila, Vedran
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Marine Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Buila, V. (2019). Prednabijanje Ottovog motora (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:584843

Buila, Vedran. "Prednabijanje Ottovog motora." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:584843

Buila, Vedran. "Prednabijanje Ottovog motora." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:584843

Buila, V. (2019). 'Prednabijanje Ottovog motora', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 11 January 2025, https://urn.nsk.hr/urn:nbn:hr:190:584843

Buila V. Prednabijanje Ottovog motora [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2025 January 11] Available at: https://urn.nsk.hr/urn:nbn:hr:190:584843

V. Buila, "Prednabijanje Ottovog motora", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:584843

Metadata
TitlePrednabijanje Ottovog motora
Title (english)Turbocharging of an spark ignition engine
AuthorVedran Buila
MentorTomislav Mrakovčić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRoberto Žigulić (član povjerenstva)
Committee memberOzren Bukovac (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Marine Engineering)
Rijeka
Defense date and country2019-01-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Kompletan rad temeljen je na unapređenju Otto benzinskog motora. Unapređenje jest u smislu podizanja snage motora bez fizičke modifikacije samog motora već se dodatna snaga postiţe dodavanjem turbopuhala i sustava hlađenja zraka kako bi se postigla ţeljena snaga motora. Proračuni su provedeni u računalnoj aplikaciji Lotus Engine Simulator koja omogućuje simuliranje rada motora nakon što izmodeliramo ţeljeni motor i unesemo ulazne parametre, pri čemu ovaj program omogućuje vrlo precizno simuliranje rada motora, a rezultati dobiveni iz tih simulacija vrlo su opseţni. U prvom dijelu diplomskog rada objašnjeni su pojmovi i veličine prilikom proračuna i projektiranja odabranog sustava prednabijanja. U nastavku su konkretno izrađeni traţeni zadaci sa kompletnim toplinskim proračunima, proračunima u Lotus Engine simulator software-u te nacrti i prikazi smještaja sustava prednabijanja koji su izrađeni u komercijalnim software-ima za tehničko crtanje i 3D CAD dizajn.
Abstract (english)
This work describes upgrading of an existing spark ignition engine. Upgrade means achieving more power without physical modification of the engine by using turbocharger with air cooling system for getting more power. The project analysis of engine is created in Lotus Engine Simulator software which give us results after we build up virtual engine and set up all input parameters. After debugging, the simulation is ready for run and obtained results contain detailed data of overall engine performance and thermodynamic and mechanical characteristics of its main parts. First part of this work describes main terms and properties used for evaluating and projecting turbocharged system. In the following part there are all calculation results with complete evaluations which has been done in commercial computer software-s. There are also drawings and 3D models about positioning of turbocharged system which are also made in commercial computer software-s for designing and 3D CAD modeling.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:584843
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-04-29 07:11:31