prikaz prve stranice dokumenta Implementacija aditivnih tehnologija u generiranju i proizvodnji dijela
Access restricted to students and staff of home institution
master's thesis
Implementacija aditivnih tehnologija u generiranju i proizvodnji dijela
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:419516
Jugovac, Mateo
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Process Planning

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Jugovac, M. (2019). Implementacija aditivnih tehnologija u generiranju i proizvodnji dijela (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:419516

Jugovac, Mateo. "Implementacija aditivnih tehnologija u generiranju i proizvodnji dijela." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:419516

Jugovac, Mateo. "Implementacija aditivnih tehnologija u generiranju i proizvodnji dijela." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:419516

Jugovac, M. (2019). 'Implementacija aditivnih tehnologija u generiranju i proizvodnji dijela', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:419516

Jugovac M. Implementacija aditivnih tehnologija u generiranju i proizvodnji dijela [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:190:419516

M. Jugovac, "Implementacija aditivnih tehnologija u generiranju i proizvodnji dijela", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:419516

Metadata
TitleImplementacija aditivnih tehnologija u generiranju i proizvodnji dijela
Title (english)Additive technologies implementation in the part design and production
AuthorMateo Jugovac
MentorMladen Perinić (mentor)
MentorZoran Jurković (komentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRoberto Žigulić (član povjerenstva)
Committee memberOzren Bukovac (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Process Planning)
Rijeka
Defense date and country2019-03-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Diplomski rad obuhvaća teorijsku razradu te praktičnu primjenu stečenih znanja s ciljem rješavanja problema zadanog zadatkom. U teorijskom su se dijelu rada obrazložili i opisali aditivni postupci, CAD i CAM aplikacije, prototipni inženjering te reverzno inženjerstvo. Osim toga teorijski je razređen kompletan postupak od skeniranja nekog predmeta pa sve do njegove izrade. Praktični je dio zadatka obuhvatio procese trodimenzionalnog skeniranja dijelova mehaničkog prijenosnika - reduktora, obrade podataka dobivenih skeniranjem, pretvorbe prikupljenih podataka u trodimenzionalne modele opisane značajkama te izradu fizičkih modela dobivenih korištenjem dvije metode aditivnih tehnologija izrade – metode ekstrudiranja i metode stereolitografije. Naposlijetku, korištenjem CAM programskog paketa kreirana je simulacija obrade strojnog dijela za računalno-numerički upravljani stroj – CNC stroj.
Abstract (english)
Graduate thesis includes theoretical elaboration and practical application of acquired knowledge for solving the assigned task. Theoretical part covers and describes additive processes, CAD and CAM applications, prototype engineering and reverse engineering. In addition, the complete process from scanning of an object, all the way to its creation, has been theoretically elaborated. The practical part of the task consists of the process of 3D scanning speed reducer parts, processing of scanned data, transformation of data collected with scanning into 3D models described with features and production of those parts using two methods of additive manufacturing technology - extrusion methods and stereolithography methods. Finally, using the CAM software package simulation of machining process for one of the reducer parts has been created and prepared for machining on computer-numerical controlled machine - CNC machine.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:419516
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-05-07 08:06:17