prikaz prve stranice dokumenta KONSTRUIRANJE I OBLIKOVANJE PRIJENOSNOG ČEKRKA ZA MANJE TERETE / DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS
Access restricted to students and staff of home institution
undergraduate thesis
KONSTRUIRANJE I OBLIKOVANJE PRIJENOSNOG ČEKRKA ZA MANJE TERETE / DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:682960
Marković, Ela
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Marković, E. (2019). KONSTRUIRANJE I OBLIKOVANJE PRIJENOSNOG ČEKRKA ZA MANJE TERETE / DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:682960

Marković, Ela. "KONSTRUIRANJE I OBLIKOVANJE PRIJENOSNOG ČEKRKA ZA MANJE TERETE / DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:682960

Marković, Ela. "KONSTRUIRANJE I OBLIKOVANJE PRIJENOSNOG ČEKRKA ZA MANJE TERETE / DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:682960

Marković, E. (2019). 'KONSTRUIRANJE I OBLIKOVANJE PRIJENOSNOG ČEKRKA ZA MANJE TERETE / DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 14 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:682960

Marković E. KONSTRUIRANJE I OBLIKOVANJE PRIJENOSNOG ČEKRKA ZA MANJE TERETE / DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 July 14] Available at: https://urn.nsk.hr/urn:nbn:hr:190:682960

E. Marković, "KONSTRUIRANJE I OBLIKOVANJE PRIJENOSNOG ČEKRKA ZA MANJE TERETE / DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:682960

Metadata
TitleKONSTRUIRANJE I OBLIKOVANJE PRIJENOSNOG ČEKRKA ZA MANJE TERETE / DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS
Title (english)DESIGN OF A COMPACT HAND-HELD WINCH FOR SMALLER LOADS
AuthorEla Marković
MentorRobert Basan (mentor)
MentorTea Marohnić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2019, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Konstruirano je prijenosno ručno vitlo koje se može primjenjivati za spuštanje i izvlačenje čamaca ili drugih tereta. U uvodu je objašnjen način funkcioniranja i prikazani su osnovni dijelovi vitla. Nakon toga napravljena je analiza tržišta te je prikazano nekoliko koncepcijskih rješenja koja bi odgovarala zadanom slučaju. Odabran je prijenosni omjer, dužina povlačenja i nosivost. Proračun konstrukcije podijeljen je na tri dijela i započinje proračunom mehanizma za prihvat tereta. Odabrano je uže, kuka i ručica za povlačenje tereta. Zatim se dimenzionira bubanj, vratilo, ležajevi i ostali pripadajući dijelovi. Na kraju su proračunati zupčanici i napravljena je kontrola naprezanja. Objašnjen je odabir svih standardnih dijelova, a nestandardni su dimenzionirani i prikazani. Model vitla izrađen je u programskom paketu CATIA V5 te je napravljen sklopni crtež vitla i radionički crtež odabranih dijelova.
Abstract (english)
A portable hand winch has been designed that can be used to lower and pull boats or other loads. The introduction explains the way the winch functions and shows its basic parts. Afterwards, a market analysis is shown and several conceptual solutions are presented to suit the given case. The gear ratio, pulling length and load capacity are selected. The construction calculation is divided into three parts and starts with the calculation of the load pulling mechanism. A rope, hook and lever are selected to pull the load. Afterwards, a drum, shaft, bearings and other similar parts are designed. Lastly, the gears are calculated and designed and stress control is made. The selection of all standard parts is explained while the non-standard ones are dimensioned and presented. The winch 3D model is made in the CATIA V5 software package. Winch assembly drawing as well as detailed drawings of selected parts are generated.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:682960
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-16 12:40:55