prikaz prve stranice dokumenta Eksperimentalna analiza torzijske krutosti polousovine formule student
Access restricted to authenticated users
undergraduate thesis
Eksperimentalna analiza torzijske krutosti polousovine formule student
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:129906
Prikratki, Karlo
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Prikratki, K. (2019). Eksperimentalna analiza torzijske krutosti polousovine formule student (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:129906

Prikratki, Karlo. "Eksperimentalna analiza torzijske krutosti polousovine formule student." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:129906

Prikratki, Karlo. "Eksperimentalna analiza torzijske krutosti polousovine formule student." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:129906

Prikratki, K. (2019). 'Eksperimentalna analiza torzijske krutosti polousovine formule student', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 05 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:129906

Prikratki K. Eksperimentalna analiza torzijske krutosti polousovine formule student [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 May 05] Available at: https://urn.nsk.hr/urn:nbn:hr:190:129906

K. Prikratki, "Eksperimentalna analiza torzijske krutosti polousovine formule student", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:129906

Metadata
TitleEksperimentalna analiza torzijske krutosti polousovine formule student
Title (english)Experimental analysis of torsional stiffness of drive shaft of formula student
AuthorKarlo Prikratki
MentorSanjin Kršćanski (mentor)
MentorMarko Čanađija (komentor)
Committee memberGoran Cukor (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2019-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovim završnim radom definiran je postupak izrade kompozitne poluosovine te testiranja iste na prikladnoj napravi. Rad obuhvaća sve smjernice za simulaciju i izbor karbonske cijevi, izbor ljepila, pripremu površina za lijepljenje te načine lijepljenja. Korišteno ljepilo je bilo Loctite EA 9497, a komponente su spajane metodom ubrizgavanja. Izračunom je dobiven maksimalni okretni moment kojim je poluosovina opterećena i o tome je ovisila konstrukcija poluosovine. Opisana je izrada naprave za eksperimentalno testiranje torzijske krutosti te način njenog funkcioniranja. Testiranjem su dobiveni različiti rezultati za različite zazore na aluminijskim čahurama. Za korišteno ljepilo najboljim se pokazao zazor od 0,2 mm. Takav lijepljeni spoj izdržao je okretni moment od 531 Nm.
Abstract (english)
This final thesis defines the procedure of composite driveshaft production and testing on a suitable device. Thesis includes all guidelines for the simulation and selection of the carbon fibre tube, adhesive selection, surface treatment and adhesive application. The components were glued together with injection method using adhesive Loctite EA 9497. The required maximum torque was calculated and a shaft was loaded and constructed according to this value. Design of the device for the experimental testing of torsional rigidity and the method of it's design are described. Testing yielded different results for different gaps of aluminuim bushings. The most suitable gap for the mentioned adhesive was 0,2 mm. The bond withstood a maximum torque of 531 Nm.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:129906
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2019-10-04 10:13:48