prikaz prve stranice dokumenta Konstrukcija hidrauličkog i pneumatskog sustava bolida RRC6
Access restricted to authenticated users
master's thesis
Konstrukcija hidrauličkog i pneumatskog sustava bolida RRC6
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:521648
Erceg, Mario
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Power Transmission and Industrial Transport Equipment and Devices

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Erceg, M. (2019). Konstrukcija hidrauličkog i pneumatskog sustava bolida RRC6 (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:521648

Erceg, Mario. "Konstrukcija hidrauličkog i pneumatskog sustava bolida RRC6." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:521648

Erceg, Mario. "Konstrukcija hidrauličkog i pneumatskog sustava bolida RRC6." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:521648

Erceg, M. (2019). 'Konstrukcija hidrauličkog i pneumatskog sustava bolida RRC6', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 28 August 2024, https://urn.nsk.hr/urn:nbn:hr:190:521648

Erceg M. Konstrukcija hidrauličkog i pneumatskog sustava bolida RRC6 [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 August 28] Available at: https://urn.nsk.hr/urn:nbn:hr:190:521648

M. Erceg, "Konstrukcija hidrauličkog i pneumatskog sustava bolida RRC6", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:521648

Metadata
TitleKonstrukcija hidrauličkog i pneumatskog sustava bolida RRC6
Title (english)Design of hydraulic and pneumatic systems of the bolide RRC6
AuthorMario Erceg
MentorGoran Gregov (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRoberto Žigulić (član povjerenstva)
Committee memberOzren Bukovac (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Power Transmission and Industrial Transport Equipment and Devices)
Rijeka
Defense date and country2019-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Diplomski rad obuhvaća konstrukciju sustava upravljanja spojkom i sustava autonomnog kočenja bolida RRC6 Riteh Racing Teama-a koji se koristi na Formula Student natjecanjima. U početku je objašnjen princip transmisije vozila te koju ulogu u njemu ima sustav za promjenu prijenosnog omjera. Naglasak je na razvoju novog konstrukcijskog rješenja upravljanja spojkom gdje se to umjesto standardnog nožnog putem papučice, prebacuje na ručno upravljanje polugom na upravljaču. Upravljanje spojkom izvedeno je kao kombinacija pneumatskog, elektroničkog i mehaničkog sustava. Drugi dio diplomskog rada bazira se na autonomnim vozilima. Nakon objašnjenja autonomnih vozila naglasak se prebacuje na hidraulički autonomni kočioni sustav bolida. Objašnjen je princip rada kočionog sustava te je konstruiran autonomni koncept koji se može implementirati na bolid.
Abstract (english)
The master's thesis covers the construction of the clutch control system and autonomous braking system of the Riteh Racing Team RRC6 car that is used in Formula Student competitions. Initially, the principle of vehicle transmission was explained and what role the clutch system and gearbox have in it. The emphasis is on developing a new clutch control system where, instead of standard foot control by the pedal, system will be controled by a lever on the steering wheel. The clutch control is designed as a combination of a pneumatic, electronic and mechanical system. The second part of the thesis is based on autonomous vehicles. After explaining what autonomous vehicles are, the emphasis is on the hydraulic autonomous braking system. The operation principle of the braking system is explained and the concept of an autonomous system that can be implemented on a car is constructed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:521648
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2019-10-10 12:23:55