prikaz prve stranice dokumenta Računalni model i analiza efikasnosti rada termoelektrane
Access restricted to authenticated users
master's thesis
Računalni model i analiza efikasnosti rada termoelektrane
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:737749
Gilja, Davor
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Process Energy Engineering and Environment Protection

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Gilja, D. (2019). Računalni model i analiza efikasnosti rada termoelektrane (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:737749

Gilja, Davor. "Računalni model i analiza efikasnosti rada termoelektrane." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:737749

Gilja, Davor. "Računalni model i analiza efikasnosti rada termoelektrane." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:737749

Gilja, D. (2019). 'Računalni model i analiza efikasnosti rada termoelektrane', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:737749

Gilja D. Računalni model i analiza efikasnosti rada termoelektrane [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:737749

D. Gilja, "Računalni model i analiza efikasnosti rada termoelektrane", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:737749

Metadata
TitleRačunalni model i analiza efikasnosti rada termoelektrane
Title (english)Computational model and efficiency analysis of steam power plant
AuthorDavor Gilja
MentorVladimir Glažar (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRoberto Žigulić (član povjerenstva)
Committee memberOzren Bukovac (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Process Energy Engineering and Environment Protection)
Rijeka
Defense date and country2019-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu izrađen je računalni model i analizira efikasnost rada termoelektrane nazivne električne snage 303 𝑀𝑊𝑒𝑙, s jednim međupregrijanjem i osam regenerativnih zagrijača napojne vode zadanih radnih parametara (tlak pare 178 bar, temperatura svježe pare 540°C). Model po uzoru na TE-Rijeka sastoji se do jednog generatora pare, visokotlačnog, srednjetlačnog i niskotlačnog dijela parne turbine, tri niskotlačna zagrijača, napojnog spremnika i četiri visokotlačna zagrijača. Prvi dio rada opisuje princip rada parno-turbinskog postrojenja. Nakon toga slijedi kratki opis TE-Rijeka. U drugom dijelu rada je opis izrade modela termoelektrane i provedba simulacije rada. Simulacija je provedena za opterećenja od 25%, 50%, 85%, 100% nazivne snage. Dobiveni rezultati uspoređeni su s stvarnim stanjem TE-Rijeka.
Abstract (english)
In this master's thesis a computer model and analysis of the operating efficiency of the thermal power plant with a nominal electrical power of 303 𝑀𝑊𝑒𝑙, with one reheating and eight regenerative feedwater heaters of the set operating parameters (steam pressure 178 bar, fresh steam temperature 540 ° C) has been done. The created model was modeled at TPP Rijeka and consists of one steam generator, a high-pressure medium-pressure and low-pressure part of a steam turbine, three low-pressure heaters, water feed tank and four high-pressure heaters. The first part describes the principle of operation of a steam turbine plant. This is followed by a brief description of TPP Rijeka. The second part of the paper describes the design of the thermal power plant model and the simulation of the operation. The simulation was performed for a workload of 25%, 50%, 85%, 100% of rated power. The obtained results were compared with the actual state of TPP Rijeka.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:737749
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2019-10-11 06:15:11