prikaz prve stranice dokumenta PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA
Access restricted to authenticated users
undergraduate thesis
PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:364697
Harmicar, Mihael
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Process Planning

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Harmicar, M. (2019). PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:364697

Harmicar, Mihael. "PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:364697

Harmicar, Mihael. "PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:364697

Harmicar, M. (2019). 'PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:364697

Harmicar M. PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:364697

M. Harmicar, "PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:364697

Metadata
TitlePROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA
Title (english)Process planning of the lower part of the piston
AuthorMihael Harmicar
MentorMladen Perinić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Process Planning)
Rijeka
Defense date and country2019-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu je prikazano projektiranje tehnološkog procesa donjeg dijela klipa u količini od 200 komada u godini dana. U radu je na početku prikazana tehnološka analiza dijela s tehnološkog i konstrukcijskog stajališta. Nadalje sam opisao izbor ulaznog materijala u kojem sam u obzir uzeo šipku i odljevak. U strukturiranju tehnološkog procesa sam opisao svaku operaciju zasebno koje su se sastojale od tokarenja, glodanja, bušenja i izrade navoje. Detaljnom razradom operacija izračunao sam sve potrebne parametre obrade za svaki zahvat navedenih operacija. Na kraju sam izračunao proizvodnu i ekonomsku brzinu za jedan zahtjev fine i jedan zahtjev grube obrade. Uz rad sam priložio i tehničku dokumentaciju ( popis alata, popis operacija, operacijski listovi, nacrti ).
Abstract (english)
This final assignment shows the design of the technological process of the lower part of the piston in the amount of 200 pieces per year. The paper initially presents a technological analysis of a part from a technological and structural standpoint. I further described the choice of input material in which I considered the bar and casting. In structuring the technological process, I described each operation separately, which consisted of turning, milling, drilling, and threading. By detailed elaboration of operations, I calculated all the necessary processing parameters for each operation of the specified operations. In the end, I calculated the production and economic speed for one fine and one rough processing requirement. I have also included the technical documentation (tool list, operations list, operation sheets, blueprints).
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:364697
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2019-10-24 07:43:28