prikaz prve stranice dokumenta Procjena dubine prokaljivanja strojnog dijela MH.19-PP.29
Access restricted to authenticated users
undergraduate thesis
Procjena dubine prokaljivanja strojnog dijela MH.19-PP.29
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:964094
Hoblaj, Miran
University of Rijeka
Faculty of Engineering
Department of Materials Science and Engineering
Section of Materials Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Hoblaj, M. (2019). Procjena dubine prokaljivanja strojnog dijela MH.19-PP.29 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:964094

Hoblaj, Miran. "Procjena dubine prokaljivanja strojnog dijela MH.19-PP.29." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:964094

Hoblaj, Miran. "Procjena dubine prokaljivanja strojnog dijela MH.19-PP.29." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:964094

Hoblaj, M. (2019). 'Procjena dubine prokaljivanja strojnog dijela MH.19-PP.29', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 02 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:964094

Hoblaj M. Procjena dubine prokaljivanja strojnog dijela MH.19-PP.29 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 May 02] Available at: https://urn.nsk.hr/urn:nbn:hr:190:964094

M. Hoblaj, "Procjena dubine prokaljivanja strojnog dijela MH.19-PP.29", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:964094

Metadata
TitleProcjena dubine prokaljivanja strojnog dijela MH.19-PP.29
Title (english)Estimation of hardening depth of workpiece MH.19-PP.29
AuthorMiran Hoblaj
MentorDario Iljkić (mentor)
Committee memberKristijan Lenac (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Materials Science and Engineering)
(Section of Materials Engineering)
Rijeka
Defense date and country2019-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema završnog rada je bila procjena dubine prokaljivanja strojnog dijela MH.19-PP.29. U teorijskom dijelu rada opisane su fazne pretvorbe čelika, TTT dijagrami, pojam kaljenja, razlika između prokaljivosti i zakaljivosti, metode procjene prokaljivosti i metode za mjerenje tvrdoće. U praktičnom dijelu rada opisan je postupak provođenja Jominyjevog pokusa na standardiziranom uzorku, a na temelju rezultata pokusa konstruirana je Jominyjeva krivulja. Pomoću dobivene Jominyjeve krivulje i korištenjem Crafts-Lamontovim dijagramima izradila se tzv. „U – krivulja“ koja predstavlja raspodjelu tvrdoće po poprečnom presjeku strojnog dijela. Analizom rezultata prokaljivosti strojnog dijela MH.19-PP.29 može se zaključiti da je gašenjem strojnog dijela u vodi i u ulju u jezgri postignuta mikrostruktura sa više od 50% martenzita, tj. da je za oba slučaja gašenja strojni dio prokaljen.
Abstract (english)
Topic of this bachelor's thesis was to estimate hardening depth of the machine part MH.19-PP.29. In theoretical part of the thesis, phase transformations of steel, TTT diagrams, concept of hardening, the difference between hardenability, methods of estimating hardenability and methods for measuring hardness are described. The practical part of the thesis describes the procedure for conducting a Jominy experiment on a standardized specimen, and based on the results of the experiment, Jominy curve is constructed. Using the obtained Jominy curve and the Crafts-Lamont diagrams the so-called "U - curve" is made that represents the distribution of hardness by the cross section of the machine part. Analyzing the results of hardenability of machine part MH.19-PP.29, one can conclude that with the quenching of machine part in the water and in the oil the microstructure in the core achieved more than 50% martensite, which means that for both cases of quenching the machine part was hardened.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:964094
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2019-10-24 07:46:57