prikaz prve stranice dokumenta Analiza termoelektrane Plomic C: usporedba varijanti na plin i na ugljen
Access restricted to authenticated users
master's thesis
Analiza termoelektrane Plomic C: usporedba varijanti na plin i na ugljen
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:542885
Tramošljika, Branimir
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Thermodynamics and Thermal Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Tramošljika, B. (2019). Analiza termoelektrane Plomic C: usporedba varijanti na plin i na ugljen (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:542885

Tramošljika, Branimir. "Analiza termoelektrane Plomic C: usporedba varijanti na plin i na ugljen." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:542885

Tramošljika, Branimir. "Analiza termoelektrane Plomic C: usporedba varijanti na plin i na ugljen." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:542885

Tramošljika, B. (2019). 'Analiza termoelektrane Plomic C: usporedba varijanti na plin i na ugljen', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:542885

Tramošljika B. Analiza termoelektrane Plomic C: usporedba varijanti na plin i na ugljen [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:542885

B. Tramošljika, "Analiza termoelektrane Plomic C: usporedba varijanti na plin i na ugljen", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:542885

Metadata
TitleAnaliza termoelektrane Plomic C: usporedba varijanti na plin i na ugljen
Title (english)Analysis of the thermal power plant Plomic C: comparison of gas and coal variants
AuthorBranimir Tramošljika
MentorPaolo Blecich (mentor)
MentorIgor Bonefačić (komentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRoberto Žigulić (član povjerenstva)
Committee memberOzren Bukovac (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Thermodynamics and Thermal Engineering)
Rijeka
Defense date and country2019-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu će se prikazati termodinamička analiza dvije vrste procesa. Sa jedne strane će se prikazati analiza termoelektrane na ugljen kao pogonsko gorivo, dok će se druge strane prikazati termodinamička analiza kombinirane plinske elektrane. Obje elektrane su iste nazivne snage od 500 MW. Kombinirana plinska elektrana će biti prikazana samo za slučaj čistog kondenzacijskog načina rada. Prije spomenute analize, analizirati će se postojeća elektroenergetska slika Republike Hrvatske. Naime, Republika Hrvatska uvozi veliki dio električne energije za vlastite potrebe stoga će se analizirati trend potrošnje električne energije u Hrvatskoj kao i postojeći energetski kapaciteti. Nakon toga analizirati će se osnovni procesi koji se odvijaju u oba tipa elektrane te će se analizirati gorivo za oba tipa. Naime, trenutno stanje u TE Plomin je takvo da se koristi uvozni ugljen koji se doprema pomorskim putem. Navedeni ugljen bi koristila i buduća termoelektrana ukoliko se izvede na takvo pogonsko gorivo. U slučaju kombinirane termoelektrane na prirodni plin, potrebno je napraviti transportni vod do okolice elektrane te još mnoge druge zahvate koji će se analizirati. Biti će napravljena termodinamička analiza oba tipa elektrane, odrediti će se protoci pare, potrebna količina goriva i sl. Uz spomenuto, pojedinačno će se prikazati emisije onečišćivača i njihova usporedba sa trenutnim stanjem. Naime, planirani zahvat uključuje zamjenu TE Plomin 1, koji trenutno nije u pogonu, sa novim kapacitetom od 500 MW. Iako je TE Plomin 1 manjeg kapaciteta od TE Plomin 2, činio je glavninu emisija štetnih plinova u atmosferu. Navedeno će se prikazati kroz emisije od 2000. do 2010. godine. Na kraju rada će se prikazati osnovna ekonomska usporedba u slučaju gradnje termoelektrane na ugljen kao pogonsko gorivo ili gradnju kombinirane termoelektrane na prirodni plin. Uspoređeni rezultati će uključivati i cijenu emisijske jedinice koja se plaća po emitiranoj količini ugljikovog dioksida.
Abstract (english)
This Graduate thesis will present thermodynamic analysis of two types of processes. On the one hand, the analysis of the coal-fired thermal power plant, while the other will show the thermodynamic analysis of the combined gas power plant. Both power plants have the same nominal power of 500 MW. The combined gas power plant will only be displayed in case of pure condensation mode. Before mentioned analysis, we are goint to analyzed existing electricity picture of the Republic of Croatia. Namely, the Republic of Croatia imports a large part of electricity for its own needs and will analyze the trend of electricity consumption in Croatia and will also analyze the existing energy capacities. After that, the basic processes that take place in both types of power plant will be analyzed and the fuel for both types will be analyzed. Specifically, the current situation in the TE Plomin is that it uses imported coal delivered by sea. That coal would also be used by a future thermal power plant if it is powered by such fuel. In the case of a natural gas power plant, it is necessary to make a conduit to the vicinity of the power plant and many other interventions whitch are going to be analyzed. Thermodynamic analysis of both types of power plants will be made, steam flows, required amount of fuel, etc. Specifically, the planned intervention involves the replacement of the Plomin 1 TPP, which is currently not in operation, with a new capacity of 500 MW. Although the Plomin 1 TPP is of less capacity than the Plomin 2 TPP, it accounted for the majority of emissions into the atmosphere. These will be shown through shows from 2000 to 2010. At the end of the paper, a basic economic comparison will be presented in the case of the construction of a coal-fired power plant as a fuel or the construction of a combined gas-fired power plant. Comparable results will also include the cost of the emission unit paid for by the amount of carbon dioxide emitted.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:542885
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2019-10-24 08:02:10