prikaz prve stranice dokumenta Dvolamelna tarna spojka za pogon traktora
Access restricted to students and staff of home institution
undergraduate thesis
Dvolamelna tarna spojka za pogon traktora
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:800518
Ljušanin, Stipe
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction Elements

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Ljušanin, S. (2019). Dvolamelna tarna spojka za pogon traktora (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:800518

Ljušanin, Stipe. "Dvolamelna tarna spojka za pogon traktora." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:800518

Ljušanin, Stipe. "Dvolamelna tarna spojka za pogon traktora." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:800518

Ljušanin, S. (2019). 'Dvolamelna tarna spojka za pogon traktora', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 02 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:800518

Ljušanin S. Dvolamelna tarna spojka za pogon traktora [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 May 02] Available at: https://urn.nsk.hr/urn:nbn:hr:190:800518

S. Ljušanin, "Dvolamelna tarna spojka za pogon traktora", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:800518

Metadata
TitleDvolamelna tarna spojka za pogon traktora
Title (english)Two-plate tractor friction clutch
AuthorStipe Ljušanin
MentorŽeljko Vrcan (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction Elements)
Rijeka
Defense date and country2019-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U završnom radu opisana je mehanički upravljana tarna spojka za pogon traktora koja se upotrebljava u mnogim strojarskim sustavima i u brojnim inženjerskim sferama. U uvodnom dijelu opisane su karakteristike i funkcije spojke, dok su u drugoj cjelini opisane najčešće vrste spojki. U narednom poglavlju opisane su tarne spojke i načini uključivanja tarnih spojki. Opisan je proces i dijelovi automobilske tarne spojke jer je potrebno konstruirati tarnu spojku za pogon traktora na temelju lamela automobilskog tipa. U novoj cjelini detaljno je objašnjena struktura i princip rada mehanički upravljane tarne spojke. Napravljen je detaljan proračun tarne spojke, na temelju najvećeg okretnog momenta i pripadajuće joj snage motora, proračun potisne poluge i proračun svornjaka. Za konstruiranje mehanički upravljanja tarne spojke korišteni jsu inženjerski programi Catia V5R20 i AutoCAD 2016.
Abstract (english)
This final paper describes a mechanically operated friction clutch for tractor propulsion that is used in many mechanical systems and in many engineering fields. The introduction describes the characteristics and functions of the clutch, while the second section describes the most common types of clutches. The following section describes friction couplings and how to engage friction couplings. The process and the parts of the automotive friction clutch are described as it is necessary to construct a friction clutch to drive the tractor based on the automotive plates. The new whole explains in detail the structure and principle of operation of the mechanically operated friction clutch. A detailed calculation of the friction clutch was made, based on the maximum torque and associated engine power, the thrust lever calculation and the bolt calculation. The mechanical control of the friction clutch were designed using Catia V5R20 and AutoCAD 2016.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:800518
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-02-10 16:40:11