prikaz prve stranice dokumenta Opstrujavanje aerodinamičnog profila sportskog motocikla
Access restricted to students and staff of home institution
undergraduate thesis
Opstrujavanje aerodinamičnog profila sportskog motocikla
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:598949
Dagostin, Karlo
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Fluid Mechanics and Hydraulic Machines

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Dagostin, K. (2019). Opstrujavanje aerodinamičnog profila sportskog motocikla (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:598949

Dagostin, Karlo. "Opstrujavanje aerodinamičnog profila sportskog motocikla." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:598949

Dagostin, Karlo. "Opstrujavanje aerodinamičnog profila sportskog motocikla." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:598949

Dagostin, K. (2019). 'Opstrujavanje aerodinamičnog profila sportskog motocikla', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:598949

Dagostin K. Opstrujavanje aerodinamičnog profila sportskog motocikla [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:190:598949

K. Dagostin, "Opstrujavanje aerodinamičnog profila sportskog motocikla", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:598949

Metadata
TitleOpstrujavanje aerodinamičnog profila sportskog motocikla
Title (english)Numerical Simulation of the Flow Around a Motorcycle
AuthorKarlo Dagostin
MentorLado Kranjčević (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Fluid Mechanics and Hydraulic Machines)
Rijeka
Defense date and country2019-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U prvome dijelu završnoga rada je provedena teorijska analiza opstrujavanja fluida te su definirane teorijske osnove aerodinamike kao što su otpor i aerodinamički uzgon. U nastavku je slijedila izrada geometrije krila u Catii V5 za koju se je kasnije izradila mreža u programu HyperMesh. Detaljno je opisan postupak izrade mreže te numerička simulacija optjecanja koristeći Virtual Wind Tunnel. Dobiveni rezultati su zatim analizirani i slikovito prikazani pomoću post-processora AcuField View. Izvršena je analiza turbulentnog strujanja zraka oko dizajnirane geometrije krila s i bez vršnih krilaca. Na kraju rada je provedena usporedba rezultata dobivenih opstrujavanjem krila pod 15° i pod 10° u odnosu na horizontalnu podlogu.
Abstract (english)
In the first part of the final paper, a theoretical analysis of fluid flow was performed and the theoretical foundations of aerodynamics such as drag and lift were defined. The following was the creation of the wing geometry in the Catia V5 for which a mesh in HyperMesh was later created. The procedure for creating the mesh and the numerical simulation of the airflow using the Virtual Wind Tunnel are described in detail. The results obtained were then analyzed and illustrated with AcuField View post-processor. An analysis of turbulent airflow around the designed wing geometry with and without the tip wings was performed. At the end of the paper, the results obtained by airflow around the wings at the angles of 15° and 10° from horizontal surface were compared.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:598949
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-05-09 19:52:53