prikaz prve stranice dokumenta Vertikalni dvostupanjski koaksijalni reduktor
Access restricted to students and staff of home institution
undergraduate thesis
Vertikalni dvostupanjski koaksijalni reduktor
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:191309
Dragičević, Ivan
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction Elements

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Dragičević, I. (2019). Vertikalni dvostupanjski koaksijalni reduktor (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:191309

Dragičević, Ivan. "Vertikalni dvostupanjski koaksijalni reduktor." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:191309

Dragičević, Ivan. "Vertikalni dvostupanjski koaksijalni reduktor." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:191309

Dragičević, I. (2019). 'Vertikalni dvostupanjski koaksijalni reduktor', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:191309

Dragičević I. Vertikalni dvostupanjski koaksijalni reduktor [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:191309

I. Dragičević, "Vertikalni dvostupanjski koaksijalni reduktor", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:191309

Metadata
TitleVertikalni dvostupanjski koaksijalni reduktor
Title (english)Two-stage vertical coaxial reduction gear
AuthorIvan Dragičević
MentorŽeljko Vrcan (mentor)
Committee memberSanjin Braut (predsjednik povjerenstva)
Committee memberDario Iljkić (član povjerenstva)
Committee memberErvin Kamenar (član povjerenstva)
Committee memberŽeljko Vrcan (član povjerenstva)
Committee memberRobert Basan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction Elements)
Rijeka
Defense date and country2019-11-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu je projektiran dvostupanjski vertikalni koaksijalni reduktor snage 75 kW prijenosnog omjera i = 22,5. Svi elementi reduktora, vratila, zupčanici i leţajevi dimenzionirani su prema uvjetima zadatka te zadovoljavaju sve traţene uvjete. Vratila su uleţištena u stoţastim valjnim leţajevima zbog aksijalnih sila koje se pojavljuju u zahvatu zupčanika sa kosim zubima. Proračunati su uvjeti podmazivanja te je izabrano odgovarajuće ulje. Proračun hlaĎenja pokazao je da ventilator za hlaĎenje reduktora nije dovoljan. Zbog toga je prilikom ugradnje reduktora potrebno osigurati odgovarajuću pumpu i hladnjak ulja.
Abstract (english)
This final paper deals with the design of a two-stage vertical coaxial reduction gear unit with 75 kW rated power and a transmission ratio of I = 22,5. All the parts of the gear unit, e.g. shafts, gears and bearings have been calculated according to the rated power and fulfill all the demands that have been placed on the assignment. The shafts are laid in taper roller bearings due to the axial forces resulting from the mesh of helical gears. The lubrication conditions have been calculated and an appropriate oil was selected. The heat balance calculation has shown that the intended fan cooling system would be inadequate, and therefore it is necessary to supply an adequate oil pump and cooler when the gear unit is being installed
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:191309
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-08-28 11:12:40