prikaz prve stranice dokumenta Sustav automatizacije stroja za prešanje metalnog otpada
Access restricted to students and staff of home institution
undergraduate thesis
Sustav automatizacije stroja za prešanje metalnog otpada
Rijeka: University of Rijeka, Faculty of Engineering, 2019. urn:nbn:hr:190:487347
Muškinja, Tihomir
University of Rijeka
Faculty of Engineering
Department of Automation and Electronics
Section of Electronics, Robotics and Automation

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Muškinja, T. (2019). Sustav automatizacije stroja za prešanje metalnog otpada (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:487347

Muškinja, Tihomir. "Sustav automatizacije stroja za prešanje metalnog otpada." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:487347

Muškinja, Tihomir. "Sustav automatizacije stroja za prešanje metalnog otpada." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:487347

Muškinja, T. (2019). 'Sustav automatizacije stroja za prešanje metalnog otpada', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 30 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:487347

Muškinja T. Sustav automatizacije stroja za prešanje metalnog otpada [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 November 30] Available at: https://urn.nsk.hr/urn:nbn:hr:190:487347

T. Muškinja, "Sustav automatizacije stroja za prešanje metalnog otpada", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:487347

Metadata
TitleSustav automatizacije stroja za prešanje metalnog otpada
Title (english)Automatization system for steel scrap baler
AuthorTihomir Muškinja
MentorNeven Bulić (mentor)
Committee memberViktor Sučić (predsjednik povjerenstva)
Committee memberNeven Bulić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Automation and Electronics)
(Section of Electronics, Robotics and Automation)
Rijeka
Defense date and country2019-09-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Ovaj rad se bavi principom rada stroja za prešanje metalnog otpada (eng. Balling presses) koji nebi bio toliko napredan i izvediv da današnja moderna tehnologija nije zastupljena s programirljivim logičkim kontrolerima (eng.PLC) koji su unaprijedili korisnost stroja, te naravno veću dobit postrojenja. Prvi dio rada je baziran na principu rada stroja gdje je pobliže opisano kako stroj funkcionira, koji su mu bitni elementi za rad, te načini upravljanja. Kako takav stroj nebi funkcionirao bez sustava automatike, nadalje u radu je opisano kako funkcionira programirljivi logički kontroler, na koje načine se može programirati, te vizualizirati unutar HMI sučelja. Na kraju ovog rada opisana je izrada programskog koda za takav stroj, izrada programskog koda simulacije ukoliko nemamo doticaj sa fizičkim strojem, te njegovog HMI sučelja koje je nepohodno za rad operatera i praćenje stroja.
Abstract (english)
The subject of this thesis is the mechanism and working principles of the balling press. This machine has become greatly deductible and advanced thanks to the presence of Progammable Logic Controllers in today's technology, which have substantially improved machine usefulness and plant profit. The first part of this thesis describes how the machine works; which elements are of importance and how it is controlled. The machine itself wouldn't be functional without automated systems, therefore this thesis will also illustrate the working principles of the Programmable Logic Controller. These working principles include methods of programming and visualisation using the HMI interface. The last part of this thesis describes the process of developing code for the balling press, the process of programming simulations which are necessary when there is no physical contact with the machine and lastly programming the HMI interface, which is indispensable for operator work and monitoring.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:487347
Study programmeTitle: Undergraduate University Study of Electrical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-01 07:53:58