prikaz prve stranice dokumenta Projekt probnog stola mikro plinske turbine JetCat SPT5
Access restricted to students and staff of home institution
undergraduate thesis
Projekt probnog stola mikro plinske turbine JetCat SPT5
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:289893
Vuković, Tonia
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Marine Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Vuković, T. (2020). Projekt probnog stola mikro plinske turbine JetCat SPT5 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:289893

Vuković, Tonia. "Projekt probnog stola mikro plinske turbine JetCat SPT5." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:289893

Vuković, Tonia. "Projekt probnog stola mikro plinske turbine JetCat SPT5." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:289893

Vuković, T. (2020). 'Projekt probnog stola mikro plinske turbine JetCat SPT5', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 04 October 2024, https://urn.nsk.hr/urn:nbn:hr:190:289893

Vuković T. Projekt probnog stola mikro plinske turbine JetCat SPT5 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 October 04] Available at: https://urn.nsk.hr/urn:nbn:hr:190:289893

T. Vuković, "Projekt probnog stola mikro plinske turbine JetCat SPT5", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:289893

Metadata
TitleProjekt probnog stola mikro plinske turbine JetCat SPT5
Title (english)Micro gas turbine JetCat SPT5 test bad
AuthorTonia Vuković
MentorTomislav Senčić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberTomislav Senčić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Marine Engineering)
Rijeka
Defense date and country2020-07-08, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Na početku završnog rada obrađene su mikro plinske turbine, njihova primjena, prednosti i nedostaci, povijesni razvoj te princip rada koji se temelji na Brayton-ovom otvorenom plinskom ciklusu. Nakon toga slijedi potpuni opis mikro plinske turbine JetCat SPT5 kao i najbitnijih komponenata koji dolaze u njenom sastavu. Nakon shvaćanja načina rada te turbine pristupa se rješavanju termodinamičkog proračuna kojim se dobiva konačna snaga na izlaznom vratilu kao i korisnost turbine. Na izlaznom vratilu potrebno je odabrati sustav kočenja kojim bi bio osiguran otpor te time i sigurnost rada turbine. U ovom slučaju odabire se histerezna kočnica koja koči na principu odnosa okretnog momenta i električne struje. Konačan i jedan od glavnih zadataka bio je osmisliti postolje na kojem bi se testirao rad mikro plinske turbine, kao i kućište koje bi služilo kao zaštita od buke i opeklina.
Abstract (english)
At the beginning of the final thesis, micro gas turbines, their application, advantages and disadvantages, historical development and the principle of operation based on Brayton's open gas cycle were discussed. This is followed by a complete description of the JetCat SPT5 micro gas turbine as well as the most important components that come in its composition. After understanding the mode of operation of this turbine, the thermodynamic calculation is approached, which provides power on the output shaft as well as the efficiency of the turbine. On the output shaft, it is necessary to select a braking system that would ensure resistance and thus the safety of the turbine. In this case, a hysteresis brake is selected, which brakes on the principle of the ratio of torque and electric current. The final and one of the main tasks was to design a test bed on which to test the operation of the micro gas turbine, as well as a housing that would serve as protection against noise and burns.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:289893
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-02-25 08:08:07