prikaz prve stranice dokumenta Mjerenja u procesu proizvodnje hidrauličkih preša
Access restricted to students and staff of home institution
master's thesis
Mjerenja u procesu proizvodnje hidrauličkih preša
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:468970
Abramić, Maja
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Measurement Techniques and Quality Systems

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Abramić, M. (2020). Mjerenja u procesu proizvodnje hidrauličkih preša (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:468970

Abramić, Maja. "Mjerenja u procesu proizvodnje hidrauličkih preša." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:468970

Abramić, Maja. "Mjerenja u procesu proizvodnje hidrauličkih preša." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:468970

Abramić, M. (2020). 'Mjerenja u procesu proizvodnje hidrauličkih preša', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:468970

Abramić M. Mjerenja u procesu proizvodnje hidrauličkih preša [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:190:468970

M. Abramić, "Mjerenja u procesu proizvodnje hidrauličkih preša", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:468970

Metadata
TitleMjerenja u procesu proizvodnje hidrauličkih preša
Title (english)Measurements in hydraulic presses production process
AuthorMaja Abramić
MentorDuško Pavletić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberDuško Pavletić (član povjerenstva)
Committee memberMarko Čanađija (član povjerenstva)
Committee memberDunja Legović (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Measurement Techniques and Quality Systems)
Rijeka
Defense date and country2020-04-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj rad daje uvid postupak mjerenja dijela proizvoda za potrebe proizvodnje hidrauličke preše. Hidraulička preša od velike je važnosti za proizvodnju automobilske gume koja je ujedno i posljednji korak koji će gumi dati oblik, takav proces naziva se vulkanizacija. Mjerenje se odvijalo uz pomoć koordinatnog mjernog uređaja (CMM – Coordinate Measuring Machine), mjerni sustav koji ima mogućnost određivanja prostornih koordinata na površini dijela koji se mjeri. Kontinuirano prikupljanje podataka vršilo se ručnim navođenjem stroja, uz pomoć softvera INCA 3D koji zapisuje podatke i sonde koja ostvaruje kontakt između vrha ticala i površine radnog komada. Prikupljeni rezultati dani su u izvješću, prikazuju odstupanja stvarnog (izmjerenog) komada od idealnog koji je dan konstrukcijskim nacrtom.
Abstract (english)
This paper provides an insight into the measurement control of a part of a product for the purpose of producing hydraulic press. Hydraulic press is of great importance for rubber production which is also the final step that will give the tire its final form, this process is called vulcanization. The measurement was performed with the help of the Coordinate Measuring Machine (CMM), a measuring system that has the ability to determine spatial coordinates on the surface of the part that is being measured. Continuous data collection was done by manual guidance of the machine, with the help of INCA 3D software, which records data, and a probe which makes contact between the tip of the tentacle and the surface of the workpiece. The collected results are given in the report, they show deviations between the actual (measured) piece and the ideal one which is given by the construction blueprint.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:468970
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-04-07 13:25:27