prikaz prve stranice dokumenta Postupak toplinske obrade strojnog dijela MV.19-ST.15
Access restricted to students and staff of home institution
undergraduate thesis
Postupak toplinske obrade strojnog dijela MV.19-ST.15
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:161689
Vukašin, Michel
University of Rijeka
Faculty of Engineering
Department of Materials Science and Engineering
Section of Structure and Material Properties

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Vukašin, M. (2020). Postupak toplinske obrade strojnog dijela MV.19-ST.15 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:161689

Vukašin, Michel. "Postupak toplinske obrade strojnog dijela MV.19-ST.15." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:161689

Vukašin, Michel. "Postupak toplinske obrade strojnog dijela MV.19-ST.15." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:161689

Vukašin, M. (2020). 'Postupak toplinske obrade strojnog dijela MV.19-ST.15', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:161689

Vukašin M. Postupak toplinske obrade strojnog dijela MV.19-ST.15 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:161689

M. Vukašin, "Postupak toplinske obrade strojnog dijela MV.19-ST.15", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:161689

Metadata
TitlePostupak toplinske obrade strojnog dijela MV.19-ST.15
Title (english)Heat treating process of workpiece MV.19-ST.15
AuthorMichel Vukašin
MentorDario Iljkić (mentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberDario Iljkić (član povjerenstva)
Committee memberSanjin Kršćanski (član povjerenstva)
Committee memberErvin Kamenar (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Materials Science and Engineering)
(Section of Structure and Material Properties)
Rijeka
Defense date and country2020-04-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu prikazana je statička analiza reklamnih stupova te provjera njihovih dimenzija. Opisana je izrada modela konstrukcije u softveru kao i proračun glavnog opterećenja vjetra. Provedene su provjere dimenzija poprečnog presjeka stupa po glavnim opterećenjima dobivenim u softveru. Svi proračuni rađeni su prema EUROCODE standardima. Proračunom su dobiveni rezultati za različite veličine poprečnih presjeka od kojih prva dva zadovoljavaju, a treći proračun ne zadovoljava uvjete EUROCODE standarada. Najboljim se pokazao proračun prvog poprečnog presjeka koji je ujedno i najvećih dimenzija te je usvojen.
Abstract (english)
In this final work is presented a static analysis of advertising pillars and checking their dimensions. It is described how it is made model of construction in software as well as the calculation of the main wind load. Checks of the cross-sectional dimension of the pillar by the principal loads obtained in the software were performed. All calculations are based on EUROCODE standards. By the calculation were obtained results for different cross-sectional sizes of which the first two satisfy and the third does not satisfy conditions of EUROCODE standards. The first cross-sectional calculation proved as the best which is adopted.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:161689
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-06-02 12:26:48