prikaz prve stranice dokumenta Mjerenja primjenom tlačnih vaga
Access restricted to students and staff of home institution
undergraduate thesis
Mjerenja primjenom tlačnih vaga
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:715439
Sinković, Sharon
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Measurement Techniques and Quality Systems

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Sinković, S. (2020). Mjerenja primjenom tlačnih vaga (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:715439

Sinković, Sharon. "Mjerenja primjenom tlačnih vaga." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:715439

Sinković, Sharon. "Mjerenja primjenom tlačnih vaga." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:715439

Sinković, S. (2020). 'Mjerenja primjenom tlačnih vaga', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 01 September 2024, https://urn.nsk.hr/urn:nbn:hr:190:715439

Sinković S. Mjerenja primjenom tlačnih vaga [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 September 01] Available at: https://urn.nsk.hr/urn:nbn:hr:190:715439

S. Sinković, "Mjerenja primjenom tlačnih vaga", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:715439

Metadata
TitleMjerenja primjenom tlačnih vaga
Title (english)Measurement with pneumatic deadweight tester
AuthorSharon Sinković
MentorDuško Pavletić (mentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberDuško Pavletić (član povjerenstva)
Committee memberDario Iljkić (član povjerenstva)
Committee memberSanjin Kršćanski (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Measurement Techniques and Quality Systems)
Rijeka
Defense date and country2020-06-04, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog završnog rada je opisati odabrani tip tlačne vage, opisati principe i postupke mjerenja, te provesti mjerenja na manometrima različitih klasa točnosti. Provedena su mjerenja na pet manometara različitog mjernog područja. Korištene su uljna tlačna vaga, plinska tlačna vaga i vakuum pumpa. Sva mjerenja zbog klasa točnosti provedena su prema C metodi. Korišteni etaloni bili su pretvornici tlaka sa pokazivačem, mehanički etalon sa kazaljkom i sklop klip-cilindar sa pripadajućim setom utega. Mjerni etaloni koji su korišteni umjereni su svakih godinu dana, a tlačne vage svakih pet godina. Klimatski parametri u laboratoriju za vrijeme mjerenja bili su kontrolirani i unutar granica dopuštenog.
Abstract (english)
The theme of this final paper is to describe the selected type of pressure scale, describe the principles and measurement procedures, and carry out measurements on manometers of different classes of accuracy. Measurements were carried out on five manometers of different measurement scale. Oil deadweight tester, gas deadweight tester and vacuum pumps were used. All measurements due to accuracy classes were performed according to the C method. The etalons used were pressure transducers with a pointer, a mechanical etalon with a hand and a piston cylinder assembly with the corresponding weight set. The measuring etalons used are moderate every year and deadweight tester every five years. Used measuring etalons are calibrated every year and deadweight testers every five years. The climatic parameters in the laboratory during the measurement were controlled and within the permited limits.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:715439
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-06-04 10:33:54