prikaz prve stranice dokumenta Konstrukcija slijednog alata za štancanje
Access restricted to students and staff of home institution
undergraduate thesis
Konstrukcija slijednog alata za štancanje
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:393597
Peroš, Duje
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Production Equipment and Robotics

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Peroš, D. (2020). Konstrukcija slijednog alata za štancanje (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:393597

Peroš, Duje. "Konstrukcija slijednog alata za štancanje." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:393597

Peroš, Duje. "Konstrukcija slijednog alata za štancanje." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:393597

Peroš, D. (2020). 'Konstrukcija slijednog alata za štancanje', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 31 August 2024, https://urn.nsk.hr/urn:nbn:hr:190:393597

Peroš D. Konstrukcija slijednog alata za štancanje [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 August 31] Available at: https://urn.nsk.hr/urn:nbn:hr:190:393597

D. Peroš, "Konstrukcija slijednog alata za štancanje", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:393597

Metadata
TitleKonstrukcija slijednog alata za štancanje
Title (english)Progressive Die Design
AuthorDuje Peroš
MentorZoran Jurković (mentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberZoran Čarija (član povjerenstva)
Committee memberSanjin Braut (član povjerenstva)
Committee memberZoran Jurković (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Production Equipment and Robotics)
Rijeka
Defense date and country2020-06-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovim radom se ukazuje na važnosti štanci u industriji. Štance pripadaju velikoj grupi specijalnih alata koji služe za obradu materijala rezanjem i oblikovanje, a da pri tome ne nastaje strugotina. Štancama se mogu obrađivati metali i nemetali. Samim korištenjem štanci u masovnoj proizvodnji dovodi se do smanjenja troškova proizvodnje. Ovaj rad u praktičnom dijelu obuhvaća proračun i konstrukciju slijednog alata. Pri konstrukciji slijednog alata napravljena je analiza izratka u pogledu tehnologičnosti, vrste materijala, ekonomičnost.
Abstract (english)
This paper shows the importance of stamping in the industry. Stampings belong to a large group of special tools that are used for processing materials by cutting and shaping, without leaving shavings. Metals and non-metals can be machined with stampings. The very use of stampings in mass production leads to a reduction in production costs. This work in the practical part includes the calculation and construction of the progressive die. During the construction of the progressive die, the analysis of the workpiece was made in terms of manufacturability, type of material and economy.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:393597
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-07-06 12:58:43