prikaz prve stranice dokumenta Numerička analiza i optimizacija topologije nosivog elementa
Access restricted to students and staff of home institution
master's thesis
Numerička analiza i optimizacija topologije nosivog elementa
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:053780
Ivaničić, Daniel
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Ivaničić, D. (2020). Numerička analiza i optimizacija topologije nosivog elementa (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:053780

Ivaničić, Daniel. "Numerička analiza i optimizacija topologije nosivog elementa." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:053780

Ivaničić, Daniel. "Numerička analiza i optimizacija topologije nosivog elementa." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:053780

Ivaničić, D. (2020). 'Numerička analiza i optimizacija topologije nosivog elementa', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:053780

Ivaničić D. Numerička analiza i optimizacija topologije nosivog elementa [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:053780

D. Ivaničić, "Numerička analiza i optimizacija topologije nosivog elementa", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:053780

Metadata
TitleNumerička analiza i optimizacija topologije nosivog elementa
Title (english)Numerical analysis and topology optimization of the load-bearing element
AuthorDaniel Ivaničić
MentorRobert Basan (mentor)
MentorTea Marohnić (komentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRobert Basan (član povjerenstva)
Committee memberTea Marohnić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2020-11-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U okviru ovoga rada provedena je optimizacija topologije na plošnom elementu. Iz dobivenih rezultata izradio se 3D parametarski model na kojemu se provela verifikacijska FEM analiza u računalnom programu Autodesk Inventor. Za potrebe definiranja analize eksperimentalno se odredio modul elastičnosti na uzorcima izrađenima pomoću ABS i PET-G materijala tehnologijom 3D ispisa s parametrima koji su istovjetni parametrima koji su se koristili prilikom izrade pločastog elementa. Definirani rubni uvjeti unutar analize provjereni su eksperimentalno korištenjem metode korelacije digitalne slike. Za potrebe provođenja eksperimenta izradila se naprava za prihvat i opterećivanje uzoraka koji su izrađeni metodom 3D ispisa. Dobiveni rezultati potom su uspoređeni s rezultatima dobivenima pomoću analize konačnim elementima.
Abstract (english)
Within this paper, the optimization of the topology on the plate element was performed. From the obtained results, a 3D parametric model was created on which the verification analysis was performed in the computer program Autodesk Inventor. For the purpose of conducting the analysis, the modulus of elasticity was determined experimentally on ABS and PET-G samples which were made using 3D printing technology with similar settings as plate samples for experimental analysis with digital image correlation. Defined boundary conditions in FEM analysis were verified experimentally using digital image correlation. For the purposes of conducting experiments, a device for holding and loading 3D printed samples was made. The obtained results were then compared with the results obtained by finite element analysis.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:053780
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-08-25 15:59:42