prikaz prve stranice dokumenta Primjena sustava bazirana na ABB IRB 120 robotskom manipulatoru u ugostiteljstvu
Access restricted to students and staff of home institution
master's thesis
Primjena sustava bazirana na ABB IRB 120 robotskom manipulatoru u ugostiteljstvu
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:323953
Župančić, Tibor
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Production Equipment and Robotics

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Župančić, T. (2020). Primjena sustava bazirana na ABB IRB 120 robotskom manipulatoru u ugostiteljstvu (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:323953

Župančić, Tibor. "Primjena sustava bazirana na ABB IRB 120 robotskom manipulatoru u ugostiteljstvu." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:323953

Župančić, Tibor. "Primjena sustava bazirana na ABB IRB 120 robotskom manipulatoru u ugostiteljstvu." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:323953

Župančić, T. (2020). 'Primjena sustava bazirana na ABB IRB 120 robotskom manipulatoru u ugostiteljstvu', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:323953

Župančić T. Primjena sustava bazirana na ABB IRB 120 robotskom manipulatoru u ugostiteljstvu [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:323953

T. Župančić, "Primjena sustava bazirana na ABB IRB 120 robotskom manipulatoru u ugostiteljstvu", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:323953

Metadata
TitlePrimjena sustava bazirana na ABB IRB 120 robotskom manipulatoru u ugostiteljstvu
Title (english)Application of ABB IRB 120 based system in catering industry
AuthorTibor Župančić
MentorZlatan Car (mentor)
Committee memberNeven Lovrin (predsjednik povjerenstva)
Committee memberSanjin Braut (član povjerenstva)
Committee memberZlatan Car (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Production Equipment and Robotics)
Rijeka
Defense date and country2020-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu napravljen je detaljan pregled postojećih rješenja primjene robotskih manipulatora u ugostiteljstvu za posluživanje pića. Na temelju pregleda postojećih rješenja napravljen je CAD model sustava za posluživanje pive i gaziranog soka (CocaCole) koristeći pneumatsku hvataljku i robotski manipulator ABB IRB 120. Za sustav je bilo potrebno izmodelirati prste hvataljke i spojnicu paralelnog hvatača sa ručnim zglobom manipulatora. Za konstrukciju prstiju hvataljke poslužile su mjere dobivene na ručnom koordinatnom mjernom stroju na temelju kojih se izradio CAD model čaša i boca korištenih u zadatku. Uz to izrađen je i model šanka, podiznog stolića te otvarača. Nosivost je potvrđena provedbom višestrukih analiza unutar programskog paketa Siemens Femap NX Nastran koji je obavio dio računalne analize konstrukcije i konačno izrada čitave simulacije prikazana je u programskom paketu RobotStudio.
Abstract (english)
In this paper, a detailed overview of the existing solutions for the application of robotic manipulators in catering for serving beverages is made. Based on a review of existing solutions, a CAD model of the system for serving beer and carbonated juice (CocaCola) was made using a pneumatic gripper and a robotic manipulator ABB IRB 120. For the system, it was necessary to model gripper fingers and coupling of parallel gripper with a robot manipulator wrist. For the construction of the gripper fingers, the measurements obtained on a manual coordinate measuring machine were used, on the basis of which a CAD model of the cups and bottles used in the task was made. In addition, a model of a bar, a lifting table and an opener was made. The load-bearing capacity was confirmed by performing multiple analyzes within the Siemens Femap NX Nastran software package, which performed part of the computer analysis of the construction and finally the creation of the entire simulation was presented in the RobotStudio software package.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:323953
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-08-27 10:09:58