prikaz prve stranice dokumenta Kontrola automatske izmjene bloka (s valjcima) valjaoničkog stana u valjaonici željeza (stand change)
Access restricted to students and staff of home institution
master's thesis
Kontrola automatske izmjene bloka (s valjcima) valjaoničkog stana u valjaonici željeza (stand change)
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:500611
Krivačić, Jurica
University of Rijeka
Faculty of Engineering
Department of Automation and Electronics
Section of Electronics, Robotics and Automation

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Krivačić, J. (2020). Kontrola automatske izmjene bloka (s valjcima) valjaoničkog stana u valjaonici željeza (stand change) (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:500611

Krivačić, Jurica. "Kontrola automatske izmjene bloka (s valjcima) valjaoničkog stana u valjaonici željeza (stand change)." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:500611

Krivačić, Jurica. "Kontrola automatske izmjene bloka (s valjcima) valjaoničkog stana u valjaonici željeza (stand change)." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:500611

Krivačić, J. (2020). 'Kontrola automatske izmjene bloka (s valjcima) valjaoničkog stana u valjaonici željeza (stand change)', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 04 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:500611

Krivačić J. Kontrola automatske izmjene bloka (s valjcima) valjaoničkog stana u valjaonici željeza (stand change) [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 July 04] Available at: https://urn.nsk.hr/urn:nbn:hr:190:500611

J. Krivačić, "Kontrola automatske izmjene bloka (s valjcima) valjaoničkog stana u valjaonici željeza (stand change)", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:500611

Metadata
TitleKontrola automatske izmjene bloka (s valjcima) valjaoničkog stana u valjaonici željeza (stand change)
Title (english)Control of automatic stand change of the rolling mill in the rolling mill
AuthorJurica Krivačić
MentorDario Matika (mentor)
Committee memberAlfredo Višković (predsjednik povjerenstva)
Committee memberDario Matika (član povjerenstva)
Committee memberSaša Sladić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Automation and Electronics)
(Section of Electronics, Robotics and Automation)
Rijeka
Defense date and country2020-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
U ovom radu objašnjen je osnovni način automatizacije dijela čeličane odnosno kontrole i izmjene bloka valjaoničkog stana. Detaljno je opisana hardverska konfiguracija s potrebnom opremom kao i programsko rješenje operativnog sustava. Rad je zamišljen tako da se kroz simulaciju prikaže kontrola i izmjena bloka valjaoničkog stana. U radu je opisana izrada upravljačkog programa u kojem je izvedena konfiguracija softwarea potrebnog za izvođenje zadane operacije. TIA Portal tvrtke Siemens korišten je pri izradi programskog dijela projekta, točnije kao programska podrška te su u ovom radu prikazane njegove mogućnosti izrade i primjene. S obzirom na funkcijski opis i primjenu bilo je potrebno izraditi programsko rješenje i provjeriti ispravnost putem simulacije.
Abstract (english)
This paper explains the basic method of automation for a steel plant unit, specifically modification of a rolling mill block. The hardware configuration with the necessary equipment as well as the software solution of the operating system are described in detail. The paper is designed in such a way that the change of the rolling mill block is shown through a simulation. Further in the paper, the creation of a driver is described as well as configuration of the software required to perform the given task. Siemens' TIA Portal was used in the development of the software part of the project, more precisely as a program, and this paper presents its development possibilities of implementation and application. With regard to the functional description and application, it was necessary to create a software solution and check its correctness through simulation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:500611
Study programmeTitle: Graduate University Study of Electrical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike (magistar/magistra inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-08-27 12:34:17