prikaz prve stranice dokumenta Postupak toplinske obrade strojnog dijela PB.20-ST.35
Access restricted to students and staff of home institution
undergraduate thesis
Postupak toplinske obrade strojnog dijela PB.20-ST.35
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:248608
Benko, Petar
University of Rijeka
Faculty of Engineering
Department of Materials Science and Engineering
Section of Structure and Material Properties

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Benko, P. (2020). Postupak toplinske obrade strojnog dijela PB.20-ST.35 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:248608

Benko, Petar. "Postupak toplinske obrade strojnog dijela PB.20-ST.35." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:248608

Benko, Petar. "Postupak toplinske obrade strojnog dijela PB.20-ST.35." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:248608

Benko, P. (2020). 'Postupak toplinske obrade strojnog dijela PB.20-ST.35', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 07 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:248608

Benko P. Postupak toplinske obrade strojnog dijela PB.20-ST.35 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 May 07] Available at: https://urn.nsk.hr/urn:nbn:hr:190:248608

P. Benko, "Postupak toplinske obrade strojnog dijela PB.20-ST.35", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:248608

Metadata
TitlePostupak toplinske obrade strojnog dijela PB.20-ST.35
Title (english)Heat treating process of workpiece PB.20-ST.35
AuthorPetar Benko
MentorDario Iljkić (mentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberZoran Čarija (član povjerenstva)
Committee memberLado Kranjčević (član povjerenstva)
Committee memberDario Iljkić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Materials Science and Engineering)
(Section of Structure and Material Properties)
Rijeka
Defense date and country2020-09-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Završni rad “Postupak toplinske obrade strojnog dijela PB.20-ST.35“ sastoji se od obrađivanja teorijskog dijela, koji se odnosi na toplinsku obradu, u kojem su postupci toplinske obrade i načini testiranja materijala nakon toplinske obrade, te se sastoji od praktičnog dijela. U tom dijelu je bilo potrebno verficirati dali materijal, od kojeg je izradeđ strojni dio PB.20-ST.35, zadovoljava određene kriterije. Da bi se postigli ti kriteriji radilo se cementiranje pod koje spada pougljičavanje, kaljenje i niskotemperaturno popuštanje. Nakon toplinske obrade cementiranjem zaključak je da materijal zadovoljava željene uvijete.
Abstract (english)
The final work "Heat treatment procedure of the machine part PB.20-ST.35" consists of processing the theoretical part, which refers to heat treatment, in which the heat treatment procedures and methods of testing materials after heat treatment, and consists of a practical part . In that part, it was necessary to verify whether the material, from which the machine part PB.20- ST.35 is made, meets certain criteria. In order to achieve these criteria, cementation was performed, which includes charring, hardening and low-temperature tempering. After heat treatment by cementation, the conclusion is that the material meets the desired conditions.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:248608
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-09-29 08:02:18