prikaz prve stranice dokumenta Mjerenje brzine strujanja zraka Pitotovom cijevi u zračnom tunelu
Access restricted to students and staff of home institution
undergraduate thesis
Mjerenje brzine strujanja zraka Pitotovom cijevi u zračnom tunelu
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:505234
Cerovec, Martin
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Fluid Mechanics and Hydraulic Machines

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Cerovec, M. (2020). Mjerenje brzine strujanja zraka Pitotovom cijevi u zračnom tunelu (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:505234

Cerovec, Martin. "Mjerenje brzine strujanja zraka Pitotovom cijevi u zračnom tunelu." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:505234

Cerovec, Martin. "Mjerenje brzine strujanja zraka Pitotovom cijevi u zračnom tunelu." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:505234

Cerovec, M. (2020). 'Mjerenje brzine strujanja zraka Pitotovom cijevi u zračnom tunelu', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:505234

Cerovec M. Mjerenje brzine strujanja zraka Pitotovom cijevi u zračnom tunelu [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:505234

M. Cerovec, "Mjerenje brzine strujanja zraka Pitotovom cijevi u zračnom tunelu", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:505234

Metadata
TitleMjerenje brzine strujanja zraka Pitotovom cijevi u zračnom tunelu
Title (english)Wind tunnel air velocity measurement by Pitot probe
AuthorMartin Cerovec
MentorLado Kranjčević (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberLado Kranjčević (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Fluid Mechanics and Hydraulic Machines)
Rijeka
Defense date and country2020-09-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog rada je izmjeriti brzinu pomoću Pitotove cijevi i usporediti podatke simulacijom te opisati granični sloj koji se stvorio. U prvom dijelu rada razrađeni su i objašnjeni osnovni pojmovi koji su potrebni za izvršenje mjerenja. Navedene su najčešće metode mjerenja brzine i objašnjene su kako funkcioniraju. Kod mjerenja u zračnom tunelu se koristilo deset točaka koje se iskoristilo kod analize podataka, dok se za simulaciju koristio softver Altair HyperWorks. Tijek mjerenja i simulacije pobliže je opisan i potkrijepljen slikama. Rezultati su dani u obliku slika, tablica i grafikona.
Abstract (english)
The main goal of this work is to measure the velocity using a Pitot tube and compare the dana obtained by the simulation and describe the boundary layer that is created. In the first part, the basic concepts required for measurements are elaborated and explained. The most common methods of measuring velocity are mentioned and explained. Measuring velocity in wind tunnel, ten different points were used in analysis, while in the simulation, the software Altair HyperWorks was used. The course of measurement and simulation is described in more detail and is supported by images. The results are presented in the form of pictures, tables and graphs.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:505234
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-09-29 09:44:14